Connecting An Audio Device - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

3.3.8

Connecting an audio device

You can use the following ports for audio devices:
● "Line Out", for example, for active speakers or external audio amplifier
● "Line In" for audio sources with line-in level
See also
Certificates and approvals (Page 169)
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
NOTICE
Cable to "Line Out" interface may cause increased emitted interference
If you connect an audio device to the "Line-Out" interface, the connection cable of the
audio may cause increased emitted interference.
You should only use insufficiently shielded audio devices such as headsets and
headphones on the "Line-Out" interface during commissioning.
If you use audio devices during productive operation, you need to ensure that the cables
of these audio devices are shielded in such a manner that they comply with the
applicable guidelines relating to emitted interference.
Mounting and connecting the HMI device
3.3 Connecting the device
51