Mounting The Device - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

3.2

Mounting the device

Position of the mounting clamps
To ensure the necessary degree of protection on the HMI device, you need to use the
mounting clamps with the positions listed below.
The positions of the mounting clamps are marked by stamps on the cutouts. Fit mounting
clamps in all the stamped cutouts.
The following table shows the type, number and position of mounting clamps needed for the
various HMI devices.
Comfort
HMI device
KTP400
KP400
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
Type
Plastic mounting clamps
Mounting and connecting the HMI device
Mounting clamps
Quantity Position on the HMI device
4
6
3.2 Mounting the device
37