Changing Settings For Operation; Configuring The Screen Keyboard - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

Commissioning the device
4.4 Configuring the device
Icon
1
2
See also
Overview of network operation (Page 117)
4.4.2

Changing settings for operation

4.4.2.1

Configuring the screen keyboard

The details provided below will explain how the screen keyboard can be displayed and
positioned.
Requirement
The Control Panel is open.
80
Function
Enabling PROFINET services (Page 109)
Time server configuration (Page 111)
Changing regional settings (Page 89)
Setting the screen saver (Page 94)
Displaying system properties (Page 102)
Displaying memory distribution (Page 103)
Setting the device name of the HMI device (Page 118)
Configuring the data channel (Page 113)
Setting the delay time (Page 105)
Setting storage location (Page 104)
Changing MPI/PROFIBUS DP settings (Page 115)
Setting the uninterruptible power supply (Page 106)
State of uninterruptible power supply (Page 108)
Enabling sound and setting sound volume (Page 97)
Assigning sound to an event (Page 98)
Changing e-mail settings (Page 124)
Configuring Telnet for remote control (Page 125)
For HMI devices with touch screen only
Additional tabs may appear in the "WinCC flexible Internet Settings" dialog. This depends on the
options that have been enabled for network operation in the project.
2
Operating Instructions, 03/2012, A5E03404994-02
Comfort Panels