Configuring Telnet For Remote Control - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

5. Use "Advanced" to open the "Advanced Email Settings" dialog:
6. Confirm your entries with "OK".
Result
The e-mail settings have been changed.
See also
Reference for functions (Page 79)
4.4.12.6

Configuring Telnet for remote control

If the Telnet service is enabled, you can remotely control the HMI device via Telnet.
Requirement
The Control Panel is open.
Procedure
Proceed as follows:
1. Open the "WinCC Internet Settings" dialog with the icon of the same name.
2. Open the "Telnet" tab.
3. Select the "telnet service enabled" option.
4. Confirm your entries with "OK".
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
– Enter the user name of the e-mail account under "Login".
– Enter the password for the e-mail account under "Password".
Commissioning the device
4.4 Configuring the device
125