Siemens SIMATIC KP400 Comfort Operating Instructions Manual page 70

Commissioning the device
4.3 Operating the device
The following table shows the system key functions that work both in the Control Panel and
in the project:
Key or key
combination
70
Function
Switch between upper and lower case:
LED on: Upper case

LED off: Lower case

Deletes the character left of cursor.
Moves to the next operating element in the TAB order.
Moves to the previous operating element in the TAB order.
Deletes the character right of cursor.
Toggles "overwrite" mode on or off.
If "overwrite" mode is switched on, the characters are overwritten to the right of
the cursor.
Cancels an action, e.g.:
Discard entry and close dialog

Executes a command, e.g.:
Operating buttons

Open dialog or select menu command

Apply value and close dialog

Moves the cursor, selection or a controller in the specified direction.
Move the cursor or selection one screen up.
Move the cursor or selection one screen down.
Press: Switches to another key mapping.
Hold down: Switches between upper and lower case.
General control function for use in keyboard shortcuts.
General control function for use in keyboard shortcuts.
Operating Instructions, 03/2012, A5E03404994-02
Comfort Panels