Download Print this page

Siemens SIMATIC IPC677D Operating Instructions Manual

Industrial pc
Hide thumbs

Advertisement

Quick Links

SIMATIC IPC677D
SIMATIC
Industrial PC
SIMATIC IPC677D
Operating Instructions
09/2014
A5E32995420-AC
___________________
Preface
___________________
Overview
___________________
Safety instructions
___________________
Mounting and connecting the
device
___________________
Commissioning the device
___________________
Operating the device and
device functions
___________________
Expanding the device and
assigning device parameters
___________________
Maintaining and servicing
your device
___________________
Technical information
___________________
Technical support
___________________
List of abbreviations
1
2
3
4
5
6
7
8
A
B

Advertisement

loading

  Also See for Siemens SIMATIC IPC677D

  Summary of Contents for Siemens SIMATIC IPC677D

  • Page 1 ___________________ SIMATIC IPC677D Preface ___________________ Overview ___________________ SIMATIC Safety instructions ___________________ Mounting and connecting the device Industrial PC SIMATIC IPC677D ___________________ Commissioning the device ___________________ Operating the device and device functions Operating Instructions ___________________ Expanding the device and assigning device parameters...
  • Page 2: Legal Information

    Note the following: WARNING Siemens products may only be used for the applications described in the catalog and in the relevant technical documentation. If products and components from other manufacturers are used, these must be recommended or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and maintenance are required to ensure that the products operate safely and without any problems.
  • Page 3: Preface

    These operating instructions apply to devices with the following order numbers 6AV7260..Scope of the documentation The documentation for the IPC includes the following: ● SIMATIC IPC677D Quick Install Guide with product information about the device, for example important notes ● SIMATIC IPC677D operating instructions The documentation is supplied with the IPC in German and English in electronic form as a PDF file on the Documentation and Drivers CD/DVD.
  • Page 4 In these operating instructions, the term "device" is also used to refer to the "SIMATIC IPC677D". The SIMATIC IPC677D consists of an operator panel with touch screen and a SIMATIC IPC627D computer unit. In these operating instructions, you also find descriptions and illustrations of the SIMATIC IPC627D which apply to the SIMATIC IPC677D.
  • Page 5: Table Of Contents

    Connecting the PROFINET strain relief .................. 47 Commissioning the device ........................49 General information on commissioning .................. 49 Switching on the device ......................50 Windows Action Center......................51 Notes on different device configurations................. 51 SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 6 Integrating a new hard disk drive in the RAID system ............84 Service and spare parts ......................86 Cleaning the Device Front ..................... 88 Separating the control unit from the computer unit ..............89 Connecting the control unit with the computer unit ..............90 SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 7 Hardware descriptions ......................129 8.5.1 Motherboard .......................... 129 8.5.1.1 Structure and functions of the motherboard ................. 129 8.5.1.2 Position of the interfaces on the motherboard ..............130 8.5.1.3 Internal interfaces ......................... 131 8.5.1.4 Front ports ..........................132 SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 8 Windows Embedded Standard 7 Professional ..............170 Technical support..........................173 Service and support ......................173 Troubleshooting ........................174 Notes on the use of third-party modules ................176 List of abbreviations ..........................177 Glossary .............................. 183 Index ..............................191 SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 9: Overview

    Overview Product description Devices with capacitive multi-touch screen Devices with resistive single touch screen SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 10 The delivery note contains information on the precise scope of functions and product package for your device. The SIMATIC IPC677D is available in the following device variants, which differ in regard to the display size, operating method and optional expansions.
  • Page 11: Applications

    (requires up to 512 MB in main memory) DVI resolution of 640 × 480 pixels up to 1920 × 1200 pixels • Graphics memory is claimed in main memory (dynamic UMA) • Triple Head Mode • SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 12 Internal: 1 × USB 3.0 high current for internal USB stick/dongle • Serial V.24 port COM2/LPT optional Monitor 1 x DVI-I (VGA monitors can be connected with a DVI/VGA • adapter acquired separately) 1 x DisplayPort • SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 13 OPC for integrating in SIMATIC software • Client server architecture • Structure of log files • SIMATIC IPC Image & Partition Software tool for local data backup and hard disk Creator V3.3.2 or higher partitioning SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 14: Design Of The Device

    Note: The BIOS setup entry "After Power Failure" has been set to "Power On". This means the device is switched on with the on/off switch. You then do not need to press the on/off button. ⑪ 4 status LEDs Status display of the operating state SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 15 ② ③ Devices with resistive single-touch screen Note If you open the sealed cover for the front USB port, the degree of protection IP65 for the front of the device is no longer guaranteed. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 16: Status Displays

    "Buffer memory SRAM (optional) (Page 66)". Example programs for controlling the LEDs under Windows operating systems is available on the Internet at the following address: Technical Support (http://www.siemens.de/automation/csi_en_WW) SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 17: Profinet Status Displays

    SNMP. PROFINET Virtual LEDs CP is active STOP CP is in the stop state Flashes There are no "slow flashing" or "fast flashing" states. See also Industry Automation and Drive Technologies - Homepage (http://www.siemens.com/automation/service&support) SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 18: Accessories

    Overview 1.3 Accessories Accessories Accessories are available for your device. These are not included in the product package. You can find Information on available accessories on the Internet at: Industry Mall (https://mall.industry.siemens.com) Expansion components and accessories (http://www.automation.siemens.com/mcms/pc- based-automation/en/industrial-pc/expansion_components_accessories) Other accessories ●...
  • Page 19: Safety Instructions

    Note that the device is classified as "Open Type" for use in the area of Industrial Control Equipment (UL508). Installation of the device in an enclosure complying with UL508 for specific permitted mounting positions (see corresponding section) is a prerequisite for approval or operation in accordance with UL508. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 20 Avoid high-frequency radiation: • Remove radiation sources from the environment of the device. • Switch off radiating devices. • Reduce the radio output of radiating devices. • Observe the information on electromagnetic compatibility (Page 112). SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 21 ESD Guideline (Page 113). Industrial Security Siemens offers products and solutions with Industrial Security functions that support the safe operation of equipment, solutions, machines, devices and/or networks. They are important components in a comprehensive Industrial Security concept. As a result the products and solutions from Siemens are constantly evolving.
  • Page 22: Notes On Usage

    • Always use suitable cleaning agents. Read the information about Chemical resistance of the HMI devices and industrial PCs (http://support.automation.siemens.com/WW/view/en/39718396) on the Internet. Note Use in an industrial environment without additional protective measures...
  • Page 23 A small number of defective pixels in the display is therefore unavoidable. This does not present a functional problem as long as the defective pixels are not bunched in one location. Additional information is available in the section "General technical specifications (Page 121)". SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 24 Safety instructions 2.2 Notes on usage SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 25: Mounting And Connecting The Device

    Death or serious injury could occur. Make sure that the damaged device is not inadvertently installed and put into operation. Label the damaged device and keep it locked away. Send off the device for immediate repair. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 26: Device Identification Data

    COA label Ethernet address 1 BIOS setup, "Main" menu Ethernet address 2 CP 1616 onboard MAC Address Layer 2 (only for PROFINET devices) CP 1616 onboard MAC address PROFINET (only for PROFINET devices) SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 27 The COA label is present only when Windows Embedded Standard 7 or Windows 7 is installed. ● COA label of a device with the Windows Embedded Standard 7 operating system ● COA label of a device with the Windows 7 operating system SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 28: Permitted Mounting Positions

    Mounting in horizontal format Note Mounting precautions • The total power for USB and PCI/PCIe expansions cannot exceed 30 W. • Operation of a DVD drive in the inclined position is not permitted. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 29: Preparing The Mounting Cutout

    The force of the clamps or operation of the device may not lead to deformation of the material in order to achieve the degrees of protection described below. Note Read the information in the section "Installation guidelines (Page 31)". SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 30 Width and height must be interchanged for mounting in vertical format. Device with capacitive multi-touch screen Device with resistive single-touch screen Installation depth Information on the overall depth is available in the section "Dimension drawings (Page 115)". SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 31: Mounting The Device

    ● Equip the control cabinet with struts for stabilizing the mounting cut-out. Install struts where necessary. ● The device with AC power supply meets the requirements for fire protection enclosures according to EN 60950-1 and can therefore be installed without an additional fire protection covering. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 32 • Fixing with mounting brackets or mounting clips • Make sure that the size of the mounting cut-out is correct; see section Preparing the mounting cutout (Page 29). See also Technical specifications (Page 121) Dimension drawings (Page 115) SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 33: Mounting Clips Or Mounting Brackets, Position For Ip65

    ● With 6 mounting brackets (available as accessories) Positions of the mounting clips or mounting brackets for IP65 To achieve the IP65 degree of protection for the device, the mounting clips or brackets must be affixed at the positions shown below. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 34: Mounting The Device With Mounting Clips

    Tighten the threaded pin to secure the mounting clip. The maximum torque when tightening the threaded pins of the mounting clips is 0.5 Nm. Repeat steps 2 and 3 for all mounting clips. Check the fit of the mounting seal. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 35: Mounting The Device With Mounting Brackets

    ● All packaging components and protective films have been removed from the device. ● You have mounting brackets to hand ● 2.5 mm hexagonal spanner Procedure Note If the mounting seal is damaged or protrudes over the device, the degree of protection is not guaranteed. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 36 The maximum permissible torque is 0.5 Nm. Repeat steps 2 and 3 until all mounting brackets are attached. Check the fit of the mounting seal. See also Preparing the mounting cutout (Page 29) SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 37: Position Of The Mounting Clips For Ip66

    • Always pull out the power plug when you are not using the device or if the device is defective. The power plug must be freely accessible. • Properly connect the device to a protective conductor. • Use a central isolating switch in the case of cabinet installation. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 38: Connecting The Equipotential Bonding Circuit

    I/O modules are safely discharged to ground. The equipotential bonding connection of the device is located underneath the device and is identified by the following symbol: SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 39: Connecting 100-240 Vac Power Supply

    VDE 0100 Part 100, or IEC 60364-1). Operation on ungrounded or impedance-grounded power networks (IT networks) is prohibited. WARNING Rated voltage The permitted nominal voltage of the device must conform with local mains voltage. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 40 A flexible cable with UL approval and with CSA label which has the following features is to be used: Type SJT with three conductors, min. 18 AWG conductor cross-section, max. length 4.5 m, and tandem grounded connector 15 A, min. 250 V. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 41: Connecting The 24 Vdc Power Supply

    1.3 mm (AWG16) and a maximum cross- section of 3.3 mm (AWG12). Note The 24 V DC power source must be adapted to the input data of the device (see specifications). SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 42 The device will simply fail to turn on. After the power supply has been connected correctly, the device will again be ready to operate. See also General technical specifications (Page 121) SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 43: Connecting Peripheral Equipment

    The connected or built-in I/Os, such as USB drives, should not introduce a reverse voltage into the device. Reverse voltages exceeding 0.5 V to ground that are generated by connected or installed components can prevent proper operation of the device or lead to its destruction. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 44: Connecting The Device To Networks

    SIMATIC NET DVD. This software package and the documentation are not part of the product package. Additional information Additional information is available in the catalog and the online ordering system Industry Mall (https://mall.industry.siemens.com). SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 45: Profinet

    SIMATIC NET products CP 1616/CP 1604, CP 1616 onboard, the developer kit. Configuration Manual This provides you will all the information necessary for Commissioning PC Stations commissioning and configuring a PC as a PROFINET IO controller or IO device. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 46: Connecting Ethernet/Usb Strain Relief

    CP16xx.sys. Further information You can find the information on specific products in the Internet at the address: Product- related Information SIMATIC NET (http://www.siemens.com/simatic-net) 3.3.8 Connecting Ethernet/USB strain relief The Ethernet/USB strain relief supplied in the product package is used to prevent accidental removal of the Ethernet cable and Industrial Ethernet FastConnect connector from the device.
  • Page 47: Connecting The Profinet Strain Relief

    M3 to the de- vice housing. 2. Connect the PROFINET cables with the device and secure the PROFINET con- nector with straight cable outlet to the ② strain relief with cable ties SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 48 Mounting and connecting the device 3.3 Connecting the device SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 49: Commissioning The Device

    ● The device is connected to the power supply. ● The protective conductor is connected. ● The connection cables are plugged in correctly. ● The following hardware is available for initial commissioning: – One USB keyboard – One USB mouse SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 50: Switching On The Device

    6. If the device is delivered with pre-installed software, the setup of the SIMATIC IPC Wizard is started automatically after operating system installation (see the following section). The installation of the operating system is complete. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 51: Windows Action Center

    Partition C: System, NTFS, 50 GB Partition D: Data, NTFS, remaining capacity Note You can find information regarding Intel RAID controllers in the RAID documentation on the included "Documentation and Drivers" DVD in the Drivers\RAID\Intel directory. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 52 In extreme cases, input from the keyboard and touch screen may be delayed for a brief period. Before you replace the defective hard disk, create a backup copy of the system. See also Managing RAID systems (Page 81) SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 53: Notes On The Dvd Burner

    • Protect the device and plant with a suitable uninterruptible power supply (UPS). 1. Open the function "Start > Shut down" in the Start menu. The green LED "PC ON/WD" changes to yellow. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 54 Commissioning the device 4.5 Switching off the device SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 55: Operating The Device And Device Functions

    Only touch the touch screen with your fingers or a suitable touch stylus. ● On-screen keyboard with touch device (see section "Using the on-screen keyboard") ● External keyboard, connected via USB ● External mouse, connected via USB SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 56: Operating A Device With Resistive Single Touch Screen

    Appearance of blisters under extreme ambient conditions Under extreme environmental conditions such as high atmospheric humidity and temperature, bubbles can form on the touch surface in rare cases. This only affects the appearance and does not represent any functional restriction. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 57: Operating A Device With Capacitive Multi-Touch Screen

    Windows operating system, as well as with the application to be used and its functions. Ensure that the gestures which the user executes on the multi-touch display are recognized by the application. It is possible that certain gestures need to be trained beforehand. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 58 ● Electromagnetic interference is present that exceeds the specification according to EN 61000-4-2. Once the interference is over, the touch screen is no longer locked. See also Chemical resistance of the HMI devices and industrial PCs (http://support.automation.siemens.com/WW/view/en/39718396) SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 59: Ipc Wizard Functions

    ● Monitoring of hard disks, memory cards and SSD drives with S.M.A.R.T. functionality ● Watchdog (hardware or software reset of the computer) ● Operating hours meter (information on the cumulative run time) ● Hard disk status and status of the RAID system SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 60: Temperature Monitoring/Display

    The temperature error is retained in memory until temperatures have fallen below the thresholds and it is reset by one of the following measures: ● Acknowledgment of the error message by the monitoring software ● Restart of the device SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 61: Watchdog (Wd)

    Windows and damage to the installation. Watchdog monitoring times The monitoring time can be configured with the DiagBase or DiagMonitor software. Note When you change the monitoring time, the change becomes effective immediately. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 62: Battery Monitoring

    Note Windows Embedded Standard The Enhanced Write Filter is deactivated in the Windows Embedded Standard default state. • Back up your data after installation of the operating system and programs. • Activate the EWF. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 63 ● "Start > All Programs >Siemens Automation > SIMATIC > EWF Manager > EWF Manager" Configure the SIMATIC IPC EWF Manager as follows: ● "Start > All Programs > Siemens Automation > SIMATIC > EWF Manager > EWF Settings" ● Click the "SIMATIC IPC EWF Manager" icon in the system tray.
  • Page 64: File Based Write Filter (Fbwf)

    FBWF is disabled by factory default in the operating system images for SIMATIC IPC and must be enabled and configured by the user. When you enable FBWF, the folders C:\FBWF and D:\FBWF are authorized for writing by default. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 65 • fbwfmgr /removeexclusion C: \Test.txt Remove file • fbwfmgr /removeexclusion C: \Test folder Remove folder • fbwfmgr /? Call up the help function Detailed instructions on FBWF are available on the Internet (http://msdn.microsoft.com/en- us/library/aa940926(WinEmbedded.5).aspx). SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 66: Buffer Memory Sram (Optional)

    An ISO file contains a memory image of the content of a CD or DVD structured in the ISO 9660 format. ● Remote reboot: An AMT PC can be booted from a bootable ISO file made available by another PC. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 67: Trusted Platform Modul (Tpm)

    SIMATIC IPC Remote Manager The "SIMATIC IPC Remote Manager" software is available for utilization of the AMT functions with SIMATIC IPCs. The software can be ordered from the Siemens online ordering system. For detailed information about "SIMATIC IPC Remote Manager", refer to the corresponding product documentation: SIMATIC IPC Remote Manager (http://support.automation.siemens.com/WW/view/en/48707158)
  • Page 68 The warranty does not cover a reset of the hardware in the event of a loss of a password. Please store the password carefully and make sure it is protected against unauthorized access. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 69: Expanding The Device And Assigning Device Parameters

    All technical data and approvals apply only to expansion units which are released by SIEMENS. Siemens disclaims any liability for impairment of functions caused by the use of third-party devices or components. Observe the installation instructions for the components. UL approval of the device only applies when the UL-approved components are used according to their "Conditions of...
  • Page 70: Expanding Memory

    Always take appropriate precautionary measures when handling these components. Refer to the ESD directives on handling electrostatic sensitive components. Note We strongly recommend using only memory modules approved by Siemens. Siemens disclaims any liability for impairment of functions caused by the use of third-party memory modules.
  • Page 71 Display of the current memory configuration A new memory module is automatically detected. When switching on the device and starting the BIOS Setup using <F2>, the current memory size is displayed under "Total Memory". SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 72: Expansion Cards

    3. Insert the expansion card into the intended slot. 4. Mount the card bracket and insert ③ the slider ① 5. Screw in the slot cover of the expansion card. 6. Insert the slider. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 73 Notes on the allocation of resources The slots for the expansion cards come with exclusive interrupts. The assignment of the PCI IRQ line to the PCI slot is explained in the chapter "Bus board (Page 133)". SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 74: Drives

    2.5" hard disk: Two slots for 2.5" hard disks ② Drive bay for 2.5" hard disks One SSD drive Item Description ① SSD drive: Two slots for SSD drives ② Drive bay for SSD drive SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 75: Removing And Installing The Drive Bay Module

    Loosen the 4 screws on the holding plates. Do not remove the screws. Remove the hard disk drive including the mounting plate from the bay. Disconnect the power supply and the data cable from the drive. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 76 Removing hard disk in removable drive bay See chapter "Maintaining and repairing the device", "Removing and installing hardware", section "Removing and installing the hard disk in the removable drive bay (Page 92)". Installation Proceed in reverse order in each case. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 77: Removing And Installing An Ssd Drive

    1. Remove the drive bay module. 2. Disconnect the power supply and the data cable from the drive. ① 3. Loosen the screws of the drive. 4. Remove the drive from the bay. Installation Proceed in reverse order. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 78: Installation Options For External Drives

    DVD drive. A DVD drive The figure shows a mounted DVD drive. Two 2.5" hard disks in removable drive bay Item Description ① 2.5" hard disk ② Tray for one 2.5" hard disk SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 79: Removing And Installing A Dvd Drive

    • Power supply connector ② • SATA connector 3. Loosen the designated rivets on the left and right on the cover with a screwdriver and put the cover down with the optical drive facing down- wards. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 80 7. Loosen the four screws that con- nect the optical drive with the drive bay and pull out the optical drive to the front from the drive bay. Installing external drive Proceed in reverse order. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 81: Maintaining And Servicing Your Device

    Example for a RAID1 system during the boot phase of the system You can configure RAID hardware with <CTRL-I> in the boot phase. The associated description is available on the "Documentation and Drivers" DVD. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 82: Raid Software

    Execution of keyboard, mouse or touch screen commands may be briefly delayed in extreme situations. This could result in operator errors on the machine or plant. Do not operate safety-critical functions when a hard disk has failed. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 83: Displaying A Defective Hard Disk Of A Raid System In The Raid Software

    BIOS setup menu "Boot". Otherwise, the system will boot from the hard disk you have just installed and the message "Operating system not found" will be displayed. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 84: Integrating A New Hard Disk Drive In The Raid System

    Sequence The following figure is an example for the automatic rebuilding process. A defective hard disk is still displayed during the rebuilding process. This display disappears when the rebuilding process is completed. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 85 The new hard disk is then assigned to a SATA port and is integrated into the RAID system. A defective hard disk is still displayed during the rebuilding process. This display disappears when the rebuilding process is completed. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 86: Service And Spare Parts

    Make sure you take precautionary measures even when you open the device, for example, when opening device doors, device covers or the housing cover. For more information, refer to the chapter "ESD Guideline (Page 113)" SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 87 UL approval of the device only applies when the UL-approved components are used according to their "Conditions of Acceptability". We are not liable for functional limitations caused by the use of third-party devices or components. See also Spare parts and repairs (http://support.automation.siemens.com/WW/view/en/16611927) SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 88: Cleaning The Device Front

    Cleaning the Device Front 1. Switch off the device. 2. Dampen the cleaning cloth. 3. Spray the cleaning agent on the cloth and not directly on the device. 4. Clean the device with the cleaning cloth. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 89: Separating The Control Unit From The Computer Unit

    Push the computer unit back ⑤ slightly until the screw lies exactly in its recess. ④ Pull the connector fully out. Lift up the computer unit and gently place it on a soft surface. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 90: Connecting The Control Unit With The Computer Unit

    Insert the metal door in the riv- ⑥ and close the metal door ⑦ with the knurled screw Slide the computer unit all the way forward to the stop screw ⑧ and screw in the 4 screws. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 91: Removing And Installing Hardware

    Internal hard disk or hard disk in removable drive bay Status display RAID BIOS RAID software SATA connection of Drive the motherboard HDD0 alarm Port 0 Device port 0 SATA 0 HDD1 alarm Port 1 Device port 1 SATA 1 SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 92: Removing And Installing The Hard Disk In The Removable Drive Bay

    3. Place the hard disk bay top down on a soft surface. ② 4. Loosen the screws of the drive. 5. Remove the drive from the removable drive bay. Installation Proceed in reverse order. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 93: Replacing The Backup Battery

    ● The device is disconnected from the mains and all connecting cables have been removed. Note You can also replace the battery while the device is running; do not touch anything with the device in this case. We recommend switching off the device beforehand. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 94 2. Remove the battery holder. 3. Detach the cable. 4. Remove the old battery. 5. Fasten the new battery and reinsert the battery holder. 6. Close the battery compartment. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 95: Removing And Installing The Power Supply

    (Torx T10) on the side. 3. Lift up the power supply slightly and remove the identified power supply connector from the power supply unit. 4. Lift out the power supply unit completely. Installation Proceed in reverse order. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 96: Removing And Installing The Bus Board

    2. Remove the drive bay module for hard disks. 3. Remove the power supply. ① 4. Remove the screws on the bus board. 5. Pull the bus board from the motherboard. Installation Proceed in reverse order. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 97: Removing And Installing The Power Supply Fan

    2. Loosen the four screws on the enclosure. 3. Take the power supply fan out of the enclosure. Installation Note Install only a fan of the same type. Note the correct mounting position of the fan. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 98 ② ● Run the power supply cable along the housing edge and fasten any excess cable as loop as shown in the illustration. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 99: Removing And Installing The Device Fan

    Note Install only a fan of the same type. Note the correct fan mounting position: Make sure that the blades of the fan are on the outside of the housing. Proceed in reverse order. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 100: Replacing The Processor

    If the processor type is changed, the BIOS must be updated so that the suitable microcode is loaded. Information about original spare parts for SIMATIC IPCs is available on the Internet at: – Contacts (http://www.siemens.com/automation/partner) – SIMATIC IPC after-sales information system (http://www.siemens.com/asis) Procedure ① 1. Loosen the screws The fourth screw is hidden by the air guide in the figure.
  • Page 101 If the installed processor is operated with a higher clock frequency than permitted, it can be destroyed or cause loss of data. Operate the processor only at a clock frequency that is equal to or less than the permitted clock frequency. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 102: Installing The Software

    Note Before you install new drivers or operating system updates for Windows MUI versions, configure the regional menu and dialog settings and the default English (US) language. other operating systems Contact the corresponding manufacturer. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 103: Installing Drivers And Software

    If you use storage controllers that are unknown to the operating system, for example a RAID controller or AHCI controller, copy the respective controller driver to a USB stick and keep this USB stick to hand. The controller driver is required during installation. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 104 You can set up partitions during the installation process and integrate storage controllers that are unknown to the operating system. To do so, select "Custom (advanced)" when prompted for the installation type in the "Install Windows" installation program. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 105 Please read the information in the section "Information for systems with RAID controller or AHCI controller". Drive options For display of additional functions that you can use to set up the data medium, (advanced) see figure "Windows installation window "Drive options (advanced)"". SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 106 Integrate this driver before you partition the data medium and before you install the operating system. For more information on integrating the storage controllers, refer to the section "Information for systems with RAID controller or AHCI controller". SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 107 1. Connect the USB stick with the controller driver to the device. 2. Start the "Install Windows" installation program as described above. 3. Select "Load Drivers" in the Windows installation window. 4. Select the respective driver on the USB stick. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 108: Setting Up The Language Selection By Means Of The Multilanguage User Interface (Mui)

    1. Choose: "Start > Control Panel > Clock, Language, and Region > Regional and Language Options" 2. Select the "Keyboards and Languages" tab. 3. Click the "Install/uninstall languages" button and make the required changes. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 109: Recovery Dvd Languages

    Note Before you install new drivers or operating system updates for Windows MUI versions, configure the regional menu and dialog settings and the default English (US) language. other operating systems Contact the corresponding provider. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 110: Installing Or Updating Application Programs And Drivers

    (images). SIMATIC IPC Image & Partition Creator supports the burning of DVD media only. You can order the tool using the Siemens online ordering system (http://www.siemens.com/automation/mall). For more information about SIMATIC IPC Image & Partition Creator, refer to its product documentation.
  • Page 111: Technical Information

    Certificates and approvals ISO 9001 certificate The Siemens quality management system for our entire product creation process (development, production and sales) meets the requirements of ISO 9001:2008. This has been certified by DQS (the German society for the certification of quality management systems).
  • Page 112: Directives And Declarations

    Low-voltage directive The device with AC power supply complies with the requirements of the EC Directive 2006/95/EC "Low Voltage Directive". Compliance with this standard has been verified according to EN 60950-1:2006 + A11:2009 +A1:2010 +A12:2011. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 113: Esd Guideline

    The material with which this person comes into contact is of particular significance. The figure shows the maximum electrostatic voltages with which a person is charged, depending on humidity and material. These values conform to the specifications of IEC 61000-4-2. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 114 This way, the discharge energy does not reach and damage the sensitive components. – Discharge your body electrostatically before you take a measurement at a module. Do so by touching grounded metallic parts. Always use grounded measuring instruments. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 115: Dimension Drawings

    Technical information 8.3 Dimension drawings Dimension drawings 8.3.1 Dimension drawing of 15" device with capacitive multi-touch screen SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 116: Dimension Drawing Of 19" Device With Capacitive Multi-Touch Screen

    Technical information 8.3 Dimension drawings 8.3.2 Dimension drawing of 19" device with capacitive multi-touch screen SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 117: Dimension Drawing Of 22" Device With Capacitive Multi-Touch Screen

    Technical information 8.3 Dimension drawings 8.3.3 Dimension drawing of 22" device with capacitive multi-touch screen SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 118: Dimension Drawing Of 15" Device With Resistive Single Touch Screen

    Technical information 8.3 Dimension drawings 8.3.4 Dimension drawing of 15" device with resistive single touch screen SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 119: Dimension Drawing Of 19" Device With Resistive Single Touch Screen

    Technical information 8.3 Dimension drawings 8.3.5 Dimension drawing of 19" device with resistive single touch screen SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 120: Dimension Drawing Of 22" Device With Resistive Single Touch Screen

    Technical information 8.3 Dimension drawings 8.3.6 Dimension drawing of 22" device with resistive single touch screen SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 121: Dimensional Drawing For The Installation Of Expansion Modules

    The device should only be connected to a 24 V DC power supply which meets the re- quirements of safe extra low voltage (SELV) according to IEC/EN/DIN EN 60950-1. A protective conductor must also be used (see section "Connecting the 24 VDC power sup- ply (Page 41)"). SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 122: Electromagnetic Compatibility

    Serial ATA, See order documentation for features ∗2 Restriction for DVD burner drives: 10 to 58 Hz: 0.019 mm / 58 to 500 Hz: 2.5 m/s Burner can only be operated in an interference-free environment SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 123 Graphics memory 32 - 512 MB Shared Memory Resolutions/frequencies DVI-I: 640 × 480 to 1920 × 1200 / 60 Hz / 24 bit /colors DisplayPort: max. 3840 × 2160 / 130 Hz / 30 bit SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 124 For unique labeling, the Ethernet ports are numbered on the enclosure. The numbering by the operating system can differ. No teaming with AMT. When using AMT, the interface x1 p1 must be used for connection to remote maintenance. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 125: Ambient Conditions

    Shock resistance, tested in accordance with IEC 60068-2-27, IEC 60068-2-29 During operation 50 m/s , 30 ms Storage/transport 250 m/s , 6 ms Restriction for DVD burners: Read, write and burner operation only permitted in an interference- free environment SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 126: Current And Power Requirements

    0.17 A USB ports max. 0.06 A max. 0.54 A max. 13 W PCI/PCIe slots 0.16 A max. 1.54 A max. Max. 37 W Operator panel max 0.14 A max. 1,33 A max. 32 W SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 127: Ac Voltage Supply

    50 A for 1 ms Active power 176 W Apparent power 190 VA Output data Voltages +12 V / 12.5 A Secondary power output Max. 150 W Power Good signal of the AC power supply SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 128: Dc Power Supply

    13 A for 50 ms independent) Active power 176 W Output data Voltages +12 V / 12.5 A Secondary power output Max. 150 W Power Good signal of the DC power supply SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 129: Hardware Descriptions

    The essential components of the motherboard are the processor and the chip set, two slots for memory modules, internal and external interfaces and the Flash BIOS. ① Processor heat sink ② Slot for the bus board ③ Two memory module slots SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 130: Position Of The Interfaces On The Motherboard

    Position of the interfaces on the motherboard Interfaces The motherboard of the device features the following interfaces: ● Interfaces for the connection of external devices ● Interfaces for internal components (drives, bus boards etc.) SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 131: Internal Interfaces

    Spare HDD Internal X803 LED display Pin assignment of the device fan supply, X512 Pin no. Short description Meaning Input/Output Ground +12 V Switched voltage supply Output CPU FAN_CLK Clock signal Input PWM signal Output SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 132: Front Ports

    Interface for I/O front USB 2.0 Internal X561 Internal USB 2.0 interface (USB channel 6) USB 3.0 Internal X560 Internal USB 3.0 interface (USB channel 3) See also Industry Automation and Drive Technologies - Homepage (http://www.siemens.com/automation/service&support) SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 133: Bus Board

    Slot 2 PCI ③ 12 V power supply connection Variant 2 has one PCI and one PCIe slot. ① Slot 1 PCI ② Slot 2 PCI Express x16 ③ 12 V power supply connection SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 134: Pci Slot Pin Assignment

    INTB# INTC# INTD# PRSNT1# Reserved Reserved +5 V (I/O) PRSNT2# Reserved Ground Ground Ground Ground Reserved Reserved Ground RST# +5 V (I/O) Ground GNT# REQ# Ground +5 V (I/O) Reserved AD[31] AD[30] AD[29] +3.3V SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 135 Ground AD[13] AD[12] AD[11] AD[10] Ground Ground AD[09] CONNECTOR KEY CONNECTOR KEY AD[08] C/BE[0]# AD[07] +3.3V +3.3V AD[06] AD[05] AD[04] AD[03] Ground Ground AD[02] AD[01] AD[00] +5 V (I/O) +5 V (I/O) ACK64# REQ64# SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 136: Pin Assignment 12 V Power Supply Connection For Expansion Cards

    P12V SMB_CLK2 n.c. SMB_DATA2 n.c. n.c. P3V3 n.c. n.c. P3V3 AUX_3V P3V3 WAKE2 PCIE_RESET_L n.c. PCIE0_ECLK PCIEX16_TX_P(15) PCIE0_ECLK_N PCIEX16_TX_N(15) PCIEX16_RX_P(15) SDVO_CTRLCLK PCIEX16_RX_N(15) PCIEX16_TX_P(14) n.c. PCIEX16_TX_N(14) PCIEX16_RX_P(14) PCIEX16_RX_N(14) PCIEX16_TX_P(13) PCIEX16_TX_N(13) PCIEX16_RX_P(13) PCIEX16_RX_N(13) PCIEX16_TX_P(12) PCIEX16_TX_N(12) PCIEX16_RX_P(12) SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 137 PCIEX16_RX_P(10) PCIEX16_RX_N(10) PCIEX16_TX_P(9) PCIEX16_TX_N(9) PCIEX16_RX_P(9) PCIEX16_RX_N(9) PCIEX16_TX_P(8) PCIEX16_TX_N(8) PCIEX16_RX_P(8) MCH_CFG_20 PCIEX16_RX_N(8) PCIEX16_TX_P(7) n.c. PCIEX16_TX_N(7) PCIEX16_RX_P(7) PCIEX16_RX_N(7) PCIEX16_TX_P(6) PCIEX16_TX_N(6) PCIEX16_RX_P(6) PCIEX16_RX_N(6) PCIEX16_TX_P(5) PCIEX16_TX_N(5) PCIEX16_RX_P(5) PCIEX16_RX_N(5) PCIEX16_TX_P(4) PCIEX16_TX_N(4) PCIEX16_RX_P(4) PCIEX16_RX_N(4) PCIEX16_TX_P(3) PCIEX16_TX_N(3) PCIEX16_RX_P(3) PCIEX16_RX_N(3) PCIEX16_TX_P(2) PCIEX16_TX_N(2) SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 138: External Ports

    Meaning Input / output Data carrier detect Input Received data Input Transmit data Output Data terminal ready Output Ground Ready for operation Input Request to send Output Clear to send Input Incoming call Input SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 139: Displayport

    Output Ground ML_Lane3- DP data 3- Output CONFIG1 CAD Cable Adapter Detect Input CONFIG2 Ground (PullDown) AUX_CH+ Auxiliary channel+ Bidirectional Ground AUX_CH- Auxiliary channel- Bidirectional Hot Plug Detect Input Ground DP_PWR +3.3V (fused) Output SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 140: Dvi-I

    Output Analog green (G) Analog Green Signal Output Analog blue (B) Analog Blue Signal Output Analog horizontal sync Analog Horizontal Sync Signal Output (HSYNC) Analog ground Analog ground (analog R, G, & return) (GND) SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 141: Ethernet

    Input / output VBUS + 5 V (fused) Output Data line Input / output Data line Input / output Ground – Data line Input Data line Input Ground – Data line Output Data line Output SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 142: Profibus

    Receive data Output 7, 8 SYMT- Internal 75 Ohm terminating resistor Shield LED 1 Lights up green: link LED 2 Lights up yellow: Activity Optional product variant Auto Negotiation and auto crossover are supported SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 143: System Resources

    Programmable interrupt controller 0032 0033 <Not used> 0034 0035 Programmable interrupt controller 0036 0037 <Not used> 0038 0039 Programmable interrupt controller 003A 003B <Not used> 003C 003D Programmable interrupt controller 003E 003F <Not used> SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 144 00B7 <Not used> 00B8 00B9 Programmable interrupt controller 00BA 00BB <Not used> 00BC 00BD Programmable interrupt controller 00BE 00BF <Not used> 00C0 00DF DMA controller 00E0 00EF <Not used> 00F0 00F0 Numeric data processor SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 145 Motherboard resources Cascaded 2004 2007 Motherboard resources FFFF FFFF Motherboard resources Interrupt Assignments The functions are assigned different interrupts, depending on the operating system. A distinction is made between the PIC and APIC modes. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 146 Host PCI-IRQ A to H is assigned to IRQ 16 to 23 permanently in APIC mode. Host PCI-IRQ A to H will be automatically assigned IRQ 0 to 15 by BIOS in PIC mode. A specific assignment can not be enforced. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 147 1, 3 Requirement: The modules in the PCI slots each require only one interrupt Requirement: VGA and PCIexpress do not require an interrupt Requirement: VGA does not require an interrupt and Ethernet1 is disabled SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 148 FED4 4FFF 20 K Trusted Platform Module 1.2 FED9 0000 FED9 3FFF 16 K Motherboard resources FEE0 0000 FEEF FFFF Motherboard resources FF00 0000 FFFF FFFF 16 M Motherboard resources Intel 82802 firmware ® SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 149: Cp 1616 Onboard Communications Processor

    The IO base controller user program runs on the PC. This program accesses the functions of the IO base user program interface. Data traffic is routed via the communication processor to several SIMATIC S7 PROFINET IO devices, ET 200S over Industrial Ethernet. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 150 IO base user program interface. Data traffic is routed via the CP 1616 onboard communication processor to a PC as PROFINET IO controller, or to an S7-400 automation system with CP 443-1 over Industrial Ethernet. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 151: Firmware Loader

    The firmware loader can use this information to check if the firmware is compatible to the device. Read the information provided along with the loader file, for example, in the readme file. This information is also displayed in the firmware loader when the FWL file is loaded. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 152 Note Ensure that the loader file you are using for the update is suitable for the version of firmware on your module. If you have any doubts, contact your local Siemens consultant. Note Be aware that aborting the loading process may result in an inconsistent state in your module.
  • Page 153: Further Actions In Step 7/Ncm Pc

    Setup parameters may not be included, depending on your order. The interface of your BIOS Setup can deviate from the figures in this document. You can find a detailed description of the BIOS on the Support website under Entry ID 92189185 (http://support.automation.siemens.com/WW/view/en/92189185). SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 154: Opening The Bios Selection Menu

    • Secure Boot Option Configuration settings to start the device in Secure Boot mode. The only software modules loaded are those that are known to be safe for the BIOS or the operating system. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 155: Configuration

    Menu layout The following figure is an example for the main menu. Device-specific information is shown as blurred. ① ④ Header Help area ② ⑤ Menu bar Key assignment ③ Settings, submenus and device-specific information SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 156 Advanced Configure hardware using different submenus Security Security functions, e.g., setting a password Power Specify CPU settings and switch-on functions. Boot Determine boot options, e.g., boot order Exit Save and exit (see Exit menu) SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 157: Exit Menu

    You can then refer to these entries for any future hardware modifications. Note Print out the table below and keep the pages in a safe place once you made your entries. The default setup settings vary depending on the ordered device configuration. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 158 Visible depending on the ordered device configuration Only visible if the corresponding parameter "Internal COM #" is enabled. Only visible if "Internal LPT" is enabled. Only available if an Azalia HD audio controller is installed. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 159 USB Port 8 (USB2 P8, internal) Enabled USB Port 9 (USB2 P9, internal) Enabled USB Port 10 (USB2 P10, internal) Enabled USB Port 11 (USB2 P11, internal) Enabled Only with rack devices Only with box devices SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 160 TPM Status Depending on configura- tion TPM Operation No Operation TPM Force Clear Disabled Set Supervisor Password Set User Password Power-on Password Disabled User Access Level Full Visible depending on the ordered device configuration SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 161 Local settings Boot Type Dual Boot Type Quick Boot Enabled Quiet Boot Enabled Network Stack Disabled PXE Boot capability Disabled Add Boot Options Auto USB Boot Enabled EFI Device First Enabled Boot Delay Time SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 162: Bios Update

    BIOS update Check regularly if updates are available for download to your device. Additional information can be found on the Internet at the following address:After Sales Information system (http://www.siemens.com/asis). Noting down and restoring BIOS Setup settings NOTICE Irretrievable loss of data All BIOS Setup settings are deleted after the BIOS update.
  • Page 163: Alarm, Error And System Messages

    The error messages output by system BIOS are listed below. For information on error messages output by the operating system or application programs, refer to the corresponding manuals. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 164: Active Management Technology (Amt)

    SIMATIC IPC with Intel® AMT from it. The following figure shows remote maintenance of SIMATIC IPCs with Intel® AMT, e.g. for troubleshooting a corrupt operating system or incorrect BIOS settings: SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 165: Overview Of Amt

    The local IPC is known below as the "AMT PC". The sections contain the following information: ● AMT settings in the MEBx and in the BIOS setup ● Basic configuration of AMT ● Further useful notes SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 166: Enabling Intel® Amt / Basic Configuration

    3. Select the "Active Management Technology Support" command in the Advanced menu. 4. Activate the option "Intel AMT Support". 5. Activate the option "Intel AMT Setup Prompt". 6. Exit the BIOS Setup with <F10> key (Save and Exit). SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 167 5. Switch to the "Intel(R) ME General Settings" submenu and enable access via the network with "Activate Network Access". 6. Confirm the dialogs that appear with "Y". Drivers are automatically installed once as required in the subsequent restart. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 168: Resetting The Intel® Amt To The Default Settings And Disabling Amt

    5. Confirm this prompt with "Y" to discard all settings in the Management Engine (ME). 6. For IPC627C/827C/677C/647C/847C/427D/477D/Field PG M4, you now need to set the "Un-Configure ME" menu command in the BIOS back to Disabled. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 169: Determining The Network Address

    2. Select the value "KVM" for "User Consent". To allow a user with administrator privileges to avoid this code query, follow these steps: 1. Select "Intel(R) AMT Configuration > User Consent" in the MEBx. 2. Enable "Opt-in configurable from remote IT". SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 170: Functional Scope In Windows

    Network Diagnostics Available Pagefile Available Printing Utilities and Management Available Registry Filter Available Remote Assistance Available Remote Client Available Remote Desktop Available SIMATIC IPC DiagBase Available, V1.4 Speech Not available System Management Administrative Tools Available SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 171 Wireless Networking Available Note the licensing agreements for Windows Embedded Standard 7 Professional. Additional information on language selection is available in section "Setting up the language selection by means of the Multilanguage User Interface (MUI)". SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 172 Technical information 8.8 Functional scope in Windows SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 173: Technical Support

    You can find additional information and support for the products described on the Internet at the following addresses: ● Technical support (http://www.siemens.de/automation/csi_en_WW) ● Support request form (http://www.siemens.com/automation/support-request) ● After-sales information system for SIMATIC PC / PG (http://www.siemens.com/asis) ● SIMATIC Documentation Collection (http://www.siemens.com/simatic-tech-doku-portal) ● Your local representative (http://www.automation.siemens.com/mcms/aspa- db/en/Pages/default.aspx)
  • Page 174: Troubleshooting

    2. Select BIOS setup, "Main" menu. 3. Set the time and date. Although the BIOS setting is The backup battery is dead. Replace the backup battery. OK, the time and data are still wrong. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 175 Change the boot priority of the boot device in the "Boot device not found" is boot priority in the BIOS setup or is Boot menu of the BIOS setup or permit boot device displayed excluded as a boot device in the boot priority SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 176: Notes On The Use Of Third-Party Modules

    PC. If the error no longer occurs, the Signal frequencies or signal • third-party module was the cause of the fault. Replace this levels are not adhered to module with a Siemens module or contact the module Different connector pin • supplier. assignments If the PC still crashes, contact your technical support team.
  • Page 177: List Of Abbreviations

    Complementary Metal Oxide Semiconductors Complementary metal oxide semiconductors Certificate of authentication Microsoft Windows Product Key Certificate of License License authorization Communications Port Term for the serial interface Communication Processor Communication computer Central Processing Unit Cathode Ray Tube SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 178 FAQs FAT 32 File Allocation Table 32-bit 32-bit file allocation table FBWF File Based Write Filter Floppy disk Disk drive, 3.5" Front Side Bus Ground Chassis ground Hard disk Hard disk High Definition Audio SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 179 MS-DOS Microsoft Disc Operating System MTBF Mean Time Between Failures Multilanguage User Interface Multilanguage operating system with Windows with language toggling; 5 languages: German, English, French, Spanish and Italian Not Applicable SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 180 Bi-directional bus system designed for up to 32 nodes Real Time Clock Real-time clock Reliable Transfer Service Request to send Receive Data Data transfer signal SATA Serial Advanced Technology Attachment SCSI Small Computer System Interface SDRAM Synchronous DRAM SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 181 VT-D Virtualization Technology for Directed I/O Enables the direct assignment of a device (e.g. network adapter) to a virtual device. Windows 2000 Wide Area Network Wave Length Encoding Loss-free file format for audio data SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 182 Program monitoring with error detection and alarming. WLAN Wireless LAN LWireless local area network Wake on Local Area Network World Wide Web Execute Disable Capability Hardware implementation Extended Graphics Array Graphic standard, maximum resolution 1.024 x 768 pixels. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 183: Glossary

    Cache High-speed access buffer for interim storage (buffering) of requested data. CE marking Communauté Européene The CE mark confirms compliance of the product with corresponding EC Directives, for example, with the EMC Directive. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 184 The data are stored in a configuration file and enable the operating system to load the correct device drivers and configure the correct device parameters. . If changes are made to the hardware configuration, the user can change entries in the configuration file using the SETUP program. . SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 185 10/100/1000 Mbps. Execute Disable Capability Hardware implementation that prevents mutual memory accesses by programs and applications. It is only effective when all relevant system components, such as processors, operating systems and applications are supported. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 186 Intel Active Management Technology This technology permits the diagnostics, management and remote control of PCs. It is only effective when all relevant system components, such as processors, operating systems and applications are supported. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 187 Legacy Boot Device Conventional drives can be used as USB devices. License key The license key represents the electronic license stamp of a license. Siemens provides the license keys for protected software. License key disk The license key disk contains the authorizations or license keys required to enable protected SIMATIC software.
  • Page 188 Restricted Access Location: Installation of the device in a production facility with restricted access, for example, a locked control cabinet. Recovery CD Contains the tools for configuring hard disks and the Windows operating system. Reset Hardware reset: Reset/restart of the PC using a button/switch. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 189 This design makes SSDs more rugged, provides shorter access times, low energy consumption and rapid data transfer. STEP 7 Programming software for the creation of user programs for SIMATIC S7 controllers. Troubleshooting Error cause, cause analysis, remedy SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 190 Wake on Local area network. This function allows the PC to be started via the LAN interface. Warm restart The restart of a computer after a program was aborted. The operating system is loaded and restarted again. The CTRL+ ALT+ DEL hotkey can be used to initiate a warm restart. SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 191: Index

    Expansion card, 121 Climatic conditions, 125 Dimensions, 115 Clock frequency, 101 Dimensions of the device, 115 COA label, 27 Directive COM1 port, 138 ESD Directive, 113 Components sensitive to electrostatic charge, 113 Display, 10, 23 SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 192 FCC, 111 File Based Write Filter, 64 Fire protection covering, 31 Labeling, 112 Fire protection enclosure, 31 Korea, 112 Firewall, 51 Limitation of liability, 87 Lithium battery, 93 Localized information, 40 Graphic controller, 123 SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 193 Power supply unit Removing, 95 Processor, 122 Online ordering system, 44 Removal, 100 On-screen error messages, 164 Processor type, 101 Open PROFIBUS, 44 Device, 69 Interface, 142 PROFIBUS/MPI, 44, 44, 44, 124 PROFIBUS/MPI interface, 12 SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 194 Ventilation slits, 31 RJ45 Ethernet, 44 VGA port, 12 Safety information Warranty, 19 Storage, 26 Watchdog, 61 Transportation, 26 Monitoring function, 61 Scope, 3 Monitoring times, 61 Scope of application, 11 Weight, 121 Serial number, 26 SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 195 Index WinAC module Power supply connection, 136 Windows 7 Installation, 103 Windows 7 Ultimate Data backup, 110 Windows Embedded Standard Data backup, 110 Windows Security Center, 51 Windows XP Professional Data backup, 110 SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...
  • Page 196 Index SIMATIC IPC677D Operating Instructions, 09/2014, A5E32995420-AC...