Input Of Values - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

Operating a project

6.5 Input of values

6.5 Input of values
If you select an I/O field in the project using the tab sequence or by touch, the entire field
content is selected. The screen keyboard appears on a touch HMI device.
Procedure
Proceed as follows:
1. To overwrite the value:
2. To change the value:
3. Close the value entry.
Result
The value of the I/O field is set.
See also
Entering and editing numeric values (Page 159)
Entering or changing alphanumeric values (Page 160)
Entering values with system keys (Page 73)
Using the screen keyboard (Page 75)
Reference for system keys (Page 69)
158
– Enter the new value using the system keys or the screen keyboard.
– Key HMI device: Deselect the content with <SHIFT+Right>.
– Touch HMI device: Deselect the content with any cursor key.
– Move the cursor to the desired location and change the value.
Operating Instructions, 03/2012, A5E03404994-02
Comfort Panels