Siemens SIMATIC KP400 Comfort Operating Instructions Manual page 74

Commissioning the device
4.3 Operating the device
Requirement
Cursor must be in the text box.
Procedure
Proceed as follows:
1. Press the respective key repeatedly until the desired character is selected in the preview.
2. To toggle between upper and a lower case, press <a/A>.
3. To navigate within the given character string, use the cursor keys.
4. If you enter values in the Control Panel, you can apply them with <ENTER> or <TAB>:
5. If you enter values in the project, you can apply them with <ENTER>.
Result
The value is entered.
See also
Input of values (Page 158)
Entering and editing numeric values (Page 159)
Entering or changing alphanumeric values (Page 160)
74
The mapping of system keys to letters and numbers can be restricted within a given
context.
The desired character is applied in about one second or immediately after pressing a
different button.
All subsequent characters are written either in upper or lower case.
– <ENTER>: Closes the dialog.
– <TAB>: Navigates to the next operating element within the dialog.
Operating Instructions, 03/2012, A5E03404994-02
Comfort Panels