Displaying System Properties - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

Commissioning the device
4.4 Configuring the device
4.4.4.11

Displaying system properties

The general system-specific information provides you with information about the processor,
operating system and memory.
The system properties are device-specific and may therefore deviate from that of your HMI
device.
Requirement
The Control Panel is open.
Procedure
Proceed as follows:
1. Open the ""System Properties" " dialog with the "System". icon.
2. Open the "General" tab.
Result
The system properties are displayed.
See also
Reference for functions (Page 79)
102
Operating Instructions, 03/2012, A5E03404994-02
Comfort Panels