Backup Registry Information - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

Commissioning the device
4.4 Configuring the device
4.4.4.3

Backup registry information

You can install and uninstall your own programs on the HMI devices under Windows CE.
You need to back up the registry settings after installation or removal.
You can back up the following data to the internal memory:
● Registry Information
● Temporary files
Restoring the file system of a memory card
If a memory card other than the SIMATIC HMI Memory Card ≥ 2 GB is used, the file system
on the memory card may be damaged, for example in the event of a power failure. The HMI
device detects the defective file system on start-up or when the memory card is inserted.
The HMI device can, on request, attempt to restore damage files. Note that not all damaged
files may be able to be restored.
Requirement
The Control Panel is open.
Procedure
Proceed as follows:
1. Open the "OP Properties" dialog with the OP icon.
2. Open to the "Persistant Storage" tab.
3. To back up registry entries to the internal memory of the HMI device, press "Save
4. To back up files from the temporary section of the internal memory of the HMI device,
5. When a corrupted file system is to be restored automatically on the memory card, select
6. Confirm your entries with "OK".
90
"Temporary files" are all files which are not saved under "\flash". Temporary files are no
longer available after restarting the HMI device.
Exception: The files in the "\Temp" directory are not backed up.
Registry".
press "Save Files".
"Automatically repair file system errors ...".
Otherwise, a corrupted file system will only be restored when requested.
Operating Instructions, 03/2012, A5E03404994-02
Comfort Panels