Setting Storage Location - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

Commissioning the device
4.4 Configuring the device
4.4.5

Setting storage location

There are various storage locations available for storing the compressed source file of your
project, for example, the external memory card or a network drive.
Requirement
The Control Panel is open.
Procedure
1. Open the "Transfer Settings" dialog with the Transfer icon.
2. Open the "Directories" tab.
3. Select a memory location under "Project Backup".
4. Confirm your entries with "OK".
Result
The storage location for the HMI device is now set.
See also
Reference for functions (Page 79)
104
NOTICE
Settings under "Project File" and "Path"
The project may not open the next time the HMI device is started if changes are made in
the "Project File" and "Path" text boxes.
Do not change the entries in the "Project File" and "Path" text boxes.
The dialog closes.
Operating Instructions, 03/2012, A5E03404994-02
Comfort Panels