Displaying Information About The Hmi Device - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

4.4.4.10

Displaying information about the HMI device

You will need specific information about the device if you contact Technical Support.
Requirement
The Control Panel is open.
Procedure
Proceed as follows:
1. Open the "OP Properties" dialog with the OP icon.
2. Open the "Device" tab.
Result
The device-specific information is displayed in the dialog:
● HMI device name
● Version number of the installed operating system image
● Version number and release date of the boot loader
● Size of internal flash memory
● MAC address of the HMI device
See also
Restarting the HMI device (Page 99)
Reference for functions (Page 79)
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
Comfort devices of 15" or more come with the second network adapter "PN_X3".
Note
The size of internal flash memory is not equivalent to application memory available for a
project.
Commissioning the device
4.4 Configuring the device
101