Mounting The Device - Siemens SIMATIC INOX Series Compact Operating Instructions

Installing and connecting the device

3.5 Mounting the device

3.5 Mounting the device
The following process describes installation for all devices based on the example of the
TP700 Comfort INOX.
Requirement
● All packaging components and the edge protection tape, if present, have been removed.
● 1 clamping frame
● 1 Allen key 2.5 mm
● Mounting clips:
– TP700 Comfort INOX: 10 mounting clips
– TP900 Comfort INOX: 13 mounting clips
– TP1200 Comfort INOX: 12 mounting clips
– TP1500 Comfort INOX: 20 mounting clips
– TP1900 Comfort INOX, ITC1900 INOX: 18 mounting clips
20
Comfort Panels INOX, ITC INOX
Compact Operating Instructions, 09/2017, A5E33472156-AI