Managing Add-Ons And License Keys; Managing Add-Ons - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

5.8

Managing add-ons and license keys

5.8.1

Managing add-ons

Introduction
You can install the following add-ons on an HMI device:
● Add-ons supplied with WinCC
● Add-ons purchased separately from WinCC
The HMI device type determines which add-ons can be installed.
For an overview of available add-ons, refer to "Introduction to WinCC".
Requirement
● The HMI device is connected to the configuring PC.
● The PG/PC interface is set
● The HMI device is selected in the project tree.
● The HMI device is switched on.
Procedure
To install an add-on on the HMI device, follow these steps:
1. Select the "Options" command in the "Online > HMI device maintenance" menu.
2. You may also click "Device status" to display the add-ons installed on the HMI device.
3. To install an add-on on the HMI device, select the add-on and use ">>" to transfer it to the
4. Click "<<" to remove an add-on from the HMI device.
5. To start the installation or removal, click "OK".
Result
The selected add-ons have been installed on the HMI device or removed from the HMI
device.
See also
Transferring license keys (Page 150)
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
All available add-ons and those already installed are shown.
list of installed add-ons.
Commissioning a project
5.8 Managing add-ons and license keys
149