Notes About Usage - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

2.3

Notes about usage

CAUTION
HMI device approved for indoor use only
The HMI device may be damaged if operated outdoors.
Operate the HMI device indoors only.
Industrial applications
The HMI device is designed for industrial applications. It conforms to the following standards:
● Requirements for emissions EN 61000-6-4: 2007
● Requirements for interference immunity EN 61000-6-2: 2005
Use in residential areas
NOTICE
HMI device not intended for use in residential area
The HMI device is not intended for use in residential areas. Operation of an HMI device in
residential areas can have a negative influence on radio or TV reception.
If the HMI device is used in a residential area, you must take measures to achieve Limit
Class B conforming to EN 55011 for RF interference.
Suitable measures for achieving the degree of noise suppression for Limit Class B include,
for example:
● Installation of the HMI device in grounded control cabinets
● Use of filters in electrical supply lines
Individual acceptance is required.
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
Safety instructions
2.3 Notes about usage
27