Changing Internet Settings; Changing General Internet Settings - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

Commissioning the device
4.4 Configuring the device
Result
The Telnet service is now enabled on the HMI device. You can remotely control the HMI
device via Telnet without restrictions.
See also
Reference for functions (Page 79)
4.4.13

Changing Internet settings

4.4.13.1

Changing general Internet settings

Requirement
The Control Panel is open.
Procedure
Proceed as follows:
1. Open the "Internet Options" dialog with the Internet Options icon.
2. Open the "General" tab.
3. Enter the homepage for the Internet browser under "Start Page".
4. Enter the address of the search engine under "Search Page".
Note
Do not change the settings in the "User Agent" field.
5. Enter the desired cache memory size under "Cache Size".
126
Operating Instructions, 03/2012, A5E03404994-02
Comfort Panels