Restarting The Hmi Device - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

4.4.4.9

Restarting the HMI device

Required restart
The HMI device must be restarted in the following cases:
● You have enabled or disabled PROFINET IO services.
● You have changed the time zone setting.
● You have changed the automatic daylight savings and standard setting
● You have changed the color depth of the screen.
● You have changed the orientation of the screen (Touch HMI devices only).
Requirement
● The Control Panel is open.
● All applications and files are closed.
● If you want to reset the HMI device to the factory settings: The HMI device is connected
Procedure
1. Open the "OP Properties" dialog with the OP icon.
2. Open the "Device" tab.
Comfort Panels
Operating Instructions, 03/2012, A5E03404994-02
NOTICE
Data loss when the HMI device is restarted
All volatile data is lost when the HMI device is restarted.
Check the following:
 The project on the HMI device is complete.
 No data is being written to the internal memory.
to the configuring PC via Ethernet.
Commissioning the device
4.4 Configuring the device
99