State Of Uninterruptible Power Supply - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

Commissioning the device
4.4 Configuring the device
4.4.8

State of uninterruptible power supply

If you have connected a UPS to a USB port of the HMI device, you can display the
monitoring status of this port.
Requirement
● The Control Panel is open.
● The UPS is connected to the 24-V input and to the HMI device's USB port.
● The "Uninterruptible Power Supply (UPS) with USB support" option is transferred to the
● UPS settings are configured
Procedure
Proceed as follows:
1. Open the "UPS Properties" dialog with the UPS icon.
2. Open the "Current status" tab.
3. Refresh the monitoring status when necessary with "Update".
Result
The current monitoring state for the UPS is displayed.
See also
Setting the uninterruptible power supply (Page 106)
Reference for functions (Page 79)
108
HMI device with ProSave.
Operating Instructions, 03/2012, A5E03404994-02
Comfort Panels