Importing And Deleting Certificates - Siemens SIMATIC KP400 Comfort Operating Instructions Manual

Commissioning the device
4.4 Configuring the device
4.4.13.4

Importing and deleting certificates

You can import, view and delete certificates that have been imported for the HMI device. The
certificates differ in the following ways:
● Certificates that you trust
● Own certificates
● Other certificates
You can import additional certificates and delete certificates that are not required.
The required settings can be obtained from your network administrator.
Requirement
The Control Panel is open.
Procedure
Proceed as follows:
1. Open the "Certificates" dialog with the Certificates icon.
2. Select the type of certificate from the selection box:
3. If you want to import a certificate:
130
– "Trusted Authorities"
– "My Certificates"
– "Other Certificates"
– Start the import with the "Import" button.
The "Import Certificate or Key" dialog box opens.
– Select the data source and confirm it with "OK".
The file selection dialog opens.
– Navigate to the location of the certificate and select the certificate.
– Confirm with "OK".
The certificate is imported to the certificate storage area of the HMI device.
Operating Instructions, 03/2012, A5E03404994-02
Comfort Panels