Software Cams, Position Switching Signals (N3)
Cam signals and cam positions
Input in machine data
The first lead or delay time is entered in the following general machine data:
MD10460 SW_CAM_MINUS_LEAD_TIME[n]
(lead or delay time on minus cams)
MD10461 SW_CAM_PLUS_LEAD_TIME[n]
(lead or delay time on plus cams)
The following can be entered in these machine data, for example:
● Constant internal delay times between actual-value sensing and cam signal output (e.g.
● Constant external delay times
Input in setting data
The second lead or delay time is entered in the following general setting data:
SD41520 SW_CAM_MINUS_TIME_TAB_1[n]
SD41521 SW_CAM_PLUS_TIME_TAB_1[n]
SD41522 SW_CAM_MINUS_TIME_TAB_2[n]
SD41523 SW_CAM_PLUS_TIME_TAB_2[n]
SD41524 SW_CAM_MINUS_TIME_TAB_3[n]
SD41525 SW_CAM_PLUS_TIME_TAB_3[n]
SD41526 SW_CAM_MINUS_TIME_TAB_4[n]
SD41527 SW_CAM_PLUS_TIME_TAB_4[n]
Delay times which may change during machining must, for example, be entered in these
setting data.
726
as determined by an oscilloscope)
Lead or delay time on minus cams 1 - 8
Lead or delay time on plus cams 1 - 8
Lead or delay time on minus cams 9 - 16
Lead or delay time on plus cams 9 - 16
Lead or delay time on minus cams 17 - 24
Lead or delay time on plus cams 17 - 24
Lead or delay time on minus cams 25 - 32
Lead or delay time on plus cams 25 - 32
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Extended Functions