Siemens SINUMERIK 840D sl Function Manual page 868

Oscillation (P5)
Data lists
12.6 Data lists
12.6.1 Machine data
12.6.1.1 General machine data
Number Identifier: $MN_
10710 PROG_SD_RESET_SAVE_TAB
11460 OSCILL_MODE_MASK
12.6.2 Setting data
12.6.2.1 Axis/spindle-specific setting data
Number Identifier: $SA_
43700 OSCILL_REVERSE_POS1
43710 OSCILL_REVERSE_POS2
43720 OSCILL_DWELL_TIME1
43730 OSCILL_DWELL_TIME2
43740 OSCILL_VELO
43750 OSCILL_NUM_SPARK_CYCLES
43760 OSCILL_END_POS
43770 OSCILL_CTRL_MASK
43780 OSCILL_IS_ACTIVE
43790 OSCILL_START_POS
868
Description
Oscillations to be saved from SD
Control screen form for asynchronous oscillation
Description
Position at reversal point 1
Position at reversal point 2
Stop time at reversal point 1
Stop time at reversal point 2
Feed velocity of oscillation axis
Number of sparking-out strokes
Position after sparking-out strokes/at end of oscillation
movement
Control screen form for oscillation
Oscillation movement ON/OFF
Position that is approached after oscillation before reversal
point 1, if activated in SD43770:
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Extended Functions