Siemens SINUMERIK 840D sl Function Manual page 273

Following the selection, a status display with the inputs made is shown.
Figure 3-7
6. Continue
When you press Continue, you are prompted to insert the installation diskettes.
Note
Please observe the requests made on the screen.
The program group "SINUMERIK 840D MMC V3.2" is generated.
If the installation is successful, this message appears:
"MMC 102 Installation is complete"
If you want to change the installation path, press Go back.
Extended Functions
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Status display of the installation mode
Operation via PG/PC (B4)
Software installation
273