Siemens SINUMERIK 840D sl Function Manual page 713

8.9.2 System variables
Table of all the input values
Type
INT
INT
REAL
REAL
REAL
REAL
REAL
REAL
INT
INT
INT
INT
INT
INT
INT
INT
INT
INT
INT
REAL
REAL
INT
INT
INT
INT
INT
INT
INT
INT
INT
INT
INT
INT
INT
INT
REAL
Extended Functions
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
System variable name
$AC_MEAS_SEMA
$AC_MEAS_VALID
$AA_MEAS_POINT1[ax]
$AA_MEAS_POINT2[ax]
$AA_MEAS_POINT3[ax]
$AA_MEAS_POINT4[ax]
$AA_MEAS_SETPOINT[ax]
$AA_MEAS_SETANGLE[ax]
$AC_MEAS_P1_COORD
$AC_MEAS_P2_COORD
$AC_MEAS_P3_COORD
$AC_MEAS_P4_COORD
$AC_MEAS_SET_COORD
$AC_MEAS_LATCH[0..3]
$AA_MEAS_P1_VALID[ax]
$AA_MEAS_P2_VALID[ax]
$AA_MEAS_P3_VALID[ax]
$AA_MEAS_P4_VALID[ax]
$AA_MEAS_SP_VALID[ax]
$AC_MEAS_WP_SETANGLE
$AC_MEAS_CORNER_SETANGLE
$AC_MEAS_DIR_APPROACH
$AC_MEAS_ACT_PLANE
$AC_MEAS_SCALEUNIT
$AC_MEAS_FINE_TRANS
$AC_MEAS_FRAME_SELECT
$AC_MEAS_CHSFR
$AC_MEAS_NCBFR
$AC_MEAS_CHBFR
$AC_MEAS_UIFR
$AC_MEAS_PFRAME
$AC_MEAS_T_NUMBER
$AC_MEAS_D_NUMBER
$AC_MEAS_TOOL_MASK
$AC_MEAS_TYPE
$AC_MEAS_INPUT[10]
Description
Interface assignment
Validity bits for input values
1st measuring point for all channel axes
2nd measuring point for all channel axes
3rd measuring point for all channel axes
4th measuring point for all channel axes
Setpoint position for all channel axes
Setpoint angle for all channel axes
Coord. system for the 1st measuring point
Coord. system for the 2nd measuring point
Coord. system for the 3rd measuring point
Coord. system for the 4th measuring point
Coordinate system of setpoint
Pick up measuring points in the WCS
Pick up 1st measuring point in the WCS
Pick up 2nd measuring point in the WCS
Pick up 3rd measuring point in the WCS
Pick up 4th measuring point in the WCS
Set setpoint position of axis as valid
Setpoint workpiece position angle
Setpoint cutting angle of corner
Approach direction
Working plane of tool
Unit of measurement INCH/METRIC
Corrections in fine displacement
Frame selection during tool measurement
Frame chain setting: System frames
Frame chain setting: Global basic frames
Frame chain setting: Channel basic frames
Frame chain setting: Settable frames
Frame chain setting: Programmed frame
Tool selection
Cutting edge selection
Tool settings
Measuring type
Measurement input parameters
Measurement (M5)
Data lists
713