Siemens SINUMERIK 840D sl Function Manual page 512

Kinematic Transformation (M1)
TRANSMIT
Assignment of names to geometry axes
According to the axis configuration overview shown above, the geometry axes involved in
the TRANSMIT operation must be defined with:
MD20060 $MC_AXCONF_GEOAX_NAME_TAB[0]="X"
MD20060 $MC_AXCONF_GEOAX_NAME_TAB[1]="Y"
MD20060 $MC_AXCONF_GEOAX_NAME_TAB[2]="Z"
(The choice of names in the above figure is in accordance with defaults).
Assignment of geometry axes to channel axes
A distinction has to be made, whetherTRANSMIT is active or not:
● TRANSMIT not active
● TRANSMIT active
Entry of channel axes
Those axes, which do not belong to the Cartesian coordinate system, are entered.
MD20080 $MC_AXCONF_CHANAX_NAME_TAB[0]="XC"
MD20080 $MC_AXCONF_CHANAX_NAME_TAB[1]="ZC"
MD20080 $MC_AXCONF_CHANAX_NAME_TAB[2]="CC"
MD20080 $MC_AXCONF_CHANAX_NAME_TAB[3]="ASC"
Assignment of channel axes to machine axes
With the cd of the channel axes as a reference, the machine axis number to which the
channel axes have been assigned, is transferred to the control system.
MD20070 $MC_AXCONF_MACHAX_USED[0]=2
MD20070 $MC_AXCONF_MACHAX_USED[1]=3
MD20070 $MC_AXCONF_MACHAX_USED[2]=1
MD20070 $MC_AXCONF_MACHAX_USED[3]=4
MD20070 $MC_AXCONF_MACHAX_USED[4]=0
(entries corresponding to the figure above)
512
One y-axis is not available.
MD20050 $MC_AXCONF_GEOAX_ASSIGN_TAB[0]=1
MD20050 $MC_AXCONF_GEOAX_ASSIGN_TAB_TAB[1]=0
MD20050 $MC_AXCONF_GEOAX_ASSIGN_TAB_TAB[2]=2
The Y-axis can be addressed by the part program.
MD24120 $MC_TRAFO_GEOAX_ASSIGN_TAB_1[0]=1
MD24120 $MC_TRAFO_GEOAX_ASSIGN_TAB_1[1]=3
MD24120 $MC_TRAFO_GEOAX_ASSIGN_TAB_1[2]=2
The Y-axis becomes the third entry of the channel axes.
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Extended Functions