Siemens SINUMERIK 840D sl Function Manual page 451

File functions
The displayed measurement results and the parameter settings can be stored as a file on
the MMC by selection of softkey File Functions.
Printer settings
The basic display for selecting a printer can be called by means of softkeys HMI \ Printer
selection.
The toggle key is used to define whether the displayed graphic is to be output directly on the
printer or transferred to a bit map file after softkey Print graphic is selected.
Figure 5-37
Direct output on printer
The printer must be set up under MS-Windows.
"Output on printer" is selected in the dropdown menu. When softkey Print graphic is
selected, the display graphic is output to the connected printer.
Extended Functions
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Basic screen for printer selection
Compensations (K3)
Circularity test
451