Siemens SINUMERIK 840D sl Function Manual page 132

Several Operator Panels on Several NCUs, Distributed Systems (B3)
Several operator panel fronts and NCUs, standard functionality
IV. Description of operator component(s)
A separate entry must be generated for each operator panel connected to the bus.
A maximum of two entries in SW 3.x.
Table 2- 4
Descriptive entry
Header
Next lines (optional)
(optional)
Identifier:
bel_name:
mmc_100
j:
Address of operator component on the bus:
Vocabulary words:
param: Introduces parameter for operator component
name: User-defined name for the operator component to be described
type: Operator component type
mmc_address: Bus address of operator component
132
Description of operator component
Formal
Identifier
[param
any_name
name=
mmc_100 | mmc_102 | op_030
type=
mmc_address = j
Entry for first or second operator panel
User-defined name with a maximum of 32 characters
mmc_102 op_030
| | : Operator component type
]
j
= 1, 2, ... 31
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Example
[param MMC_1]
name = MMC_A
type = mmc_100
mmc_address = 1
Extended Functions