Siemens SINUMERIK 840D sl Function Manual page 306

Manual and Handwheel Travel (H1)
Handwheel travel in JOG
Example: Velocity override of positioning axis
Assumption:
Channel 1: Channel axis A corresponds to machine axis 4 and handwheel 1 is assigned to
this axis.
If block POS[A]=100 FDA[A]=0 is processed in the main run, machine axis 4 cannot be
traversed with DRF. This means that if the channel-specific DRF signal is active, alarm
14320 (Handwheel 1 used twice (6) in channel 1 axis A) is signaled.
If machine axis 4 is traversed with DRF, then no POS[A]=100 FDA[A]=0 movement can
be executed while a DRF movement is being performed. Alarm 14320 (Handwheel 1 used
twice (1) in channel 1 axis A) is signaled.
Example: Path override of the PLC axis
Assumption:
Channel 1: Handwheel 2 is assigned to machine axis 4.
If an axis movement with path override of the 4th machine axis triggered by FC18 is
processed in the main run, machine axis 4 cannot be traversed with DRF. This means that if
the channel-specific DRF signal is active, alarm 14320 (Handwheel 2 used twice (9) in
channel 1 axis A) is signaled.
If machine axis 4 is traversed with DRF, then no axis movement with path override triggered
by FC18 can be executed while a DRF movement is being performed. Alarm 14320
(Handwheel 2 used twice (4) in channel 1 axis A) is signaled.
306
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
Extended Functions