Siemens SINUMERIK 840D sl Function Manual page 735

9.5 Supplementary conditions
Availability of function "Software cams, position switching signals"
The function is an option and is available for:
● SINUMERIK 840D with NCU 572/573, SW 2 and higher
Extensions
● The extension:
● The extensions:
Extended Functions
Function Manual, 03/2009, 6FC5397-1BP10-4BA0
32 instead of 16 cam pairs
is available with software version 4.1 and higher.
independent, timer-controlled output
position-time cams
suppression of signal inversion for timer-controlled outputs
are available with software version 6.3 and higher.
Software Cams, Position Switching Signals (N3)
Supplementary conditions
735