Parameter
Source File
Click the Upgrade button to initiate the firmware upgrade.
Firmware Backup to HTTP
This window is used to initiate a firmware backup to a local PC using HTTP.
To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to
HTTP, as shown below:
The fields that can be configured are described below:
Parameter
Source
Click the Backup button to initiate the firmware backup.
D-Link DGS-1100 MP/MPP Series Switch User Manual
Description
Enter the source filename and path of the firmware file
located on the local PC. Alternatively click the Browse
button to navigate to the location of the firmware file located
on the local PC.
Figure 15-3 Firmware Backup to HTTP window
Description
Select the source image to use for the firmware backup.
49