Inspection and maintenance every 500 to 1000 hours or annually
Clean the left and right wheel traction, pow-
er steering and working hydraulics pump
motors
-
Raise and secure the fork carriage against inadvertent
lowering.
-
Depress the emergency button.
-
Open the overhead guard to the 2nd lock-in position.
-
Clean the traction motors and the power steering and
working hydraulics pump motor with compressed air.
NOTE
Protect the electrical system and connections against
moisture. Take care not to let water penetrate the electric
motors. Should moisture penetrate the motors neverthe-
less, either operate the lift truck (drying with own heat) or
dry the motors with heat, air jet, etc. in order to avoid
corrosion damage.
Clean the traction motor and tractor com-
partment fans
NOTE
Contact your authorised distributor for cleaning the fans.
e336-02/29
Clean the digital control
-
Pull the electrical system cover (1) out of the latch raise it
until it is supported by the stay (2).
-
Unlock the connector and pull it out.
-
Clean the digital control and fan with an air jet.
NOTE
Protect the electrical system and digital control against
moisture.
-
Refit the digital control cover.
-
Insert the connector and lock it.
-
Close the electrical compartment cover.
1
e336-02/48
Maintenance
2
e3363385
67