Check The Security Of The Hydraulic Oil Tank; Lubricate The Steer Axle, Mast And Tilt Cylinder Bearings; Other Cleaning And Greasing Work - Linde E 20-02 Operating Instructions Manual

Inspection and maintenance as required

Check the security of the hydraulic oil tank

- Open the overhead guard to the first detent position.
- Check the tension of the hydraulic oil tank (3) mounting
strap (1) and tighten with a ratchet lever (2) if required.
- Close the overhead guard.
2
1
Lubricate the steer axle, mast and tilt cylin-
der bearings
If used in clean and dry areas, truck servicing every 1000
service hours is sufficient as a rule. For mixed duty inside/
outside, cleaning and greasing between 500 and 1000 service
hours is recommanded; but it is required at least every 12
month.
In an environment with dust, dirt, water and possibly de-icing
salt or chemicals, weekly lubrication will extend the service
life of the bearings substantially.
NOTE
Greasing is always recommended after cleaning with a
steam jet.
NOTE
Preferably lubricate the bearings with less grease more
often than a lot of grease less frequently.
3
e336-02/47
Maintenance

Other cleaning and greasing work

If used in clean and dry areas, truck servicing every 1000
service hours is sufficient as a rule. For mixed duty inside/
outside, cleaning and greasing between 500 and 1000 service
hours is recommanded; but it is required at least every 12
month.
65