Inspection and maintenance every 3000 hours or every 2 years
Renew the hydraulic oil
ATTENTION
Follow the precautions for handling fluids and
lubricants.
NOTE
The hydraulic oil can only be pumped out with the appro-
priate aid (hand pump).
-
Lower the fork carriage completely.
-
Open the overhead guard to the 2nd lock-in position.
-
Unscrew the fastening bolt (2) on the suction filter cover
(3).
-
Remove the breather filter cover.
-
Withdraw the suction filter slowly so that the oil can flow
back into the tank.
-
Pump out the hydraulic oil with the appropriate hand
pump.
-
Fill new hydraulic oil into the hydraulic oil tank.
Hydraulic oil tank capacity ........................ approx. 28.5 litres
1
3
1
4
-
Install the filter along with the filter cover.
-
Pull out the breather filter (1) and check the oil level with
the dipstick (4). Add oil as required through the filler neck
up to the top mark in the filler neck.
-
Close the overhead guard.
2
e336-02/54
Maintenance
77