Adjusting The Driver's Seat; Adjusting The Swivel Seat; Adjusting Armrest Of The Driver's Seat - Linde E 20-02 Operating Instructions Manual

Daily checks and servicing before operation

Adjusting the driver's seat

- For a horizontal adjustment of the seat, pull the lever (1)
up.
- Slide the driver's seat forward or back in the rails until the
optimum position for operating the steering wheel, pedals
and control levers is obtained.
- Re-engage the lever.
- Lift the lever (4) to adjust the backrest.
- Swing the backrest forwards or backwards until a comfort-
able seating position is achieved.
- Engage lever (4) again.
- Fold out the crank (3) and rotate to adjust the seat spring
to the driver's weight. The adjustment ange from 50 kg to
130 kg is readable on the indicator (2).
NOTE
Prolonged sitting puts a great strain on the spinal
column. Do light exercises regularly to prevent back
problems.
3
2

Adjusting the swivel seat*

NOTE
The swivel seat allows better view to the rear when
reversing for longer periods.
It is recommended to set the seat to the straight-ahead
position for longer periods of travel in the forward
direction.
ATTENTION
When operating the truck, the swivel must be
locked.
- Pull up the locking lever (1).This releases the swivel and
allows the seat to be swivelled 17° to the right, lockable in
the 0° and 17° positions.
- Engage the locking bolt (1) audibly.
NOTE
The swivel is maintenance-free.
* Option
4
1
e336-02/11
Beginning operation

Adjusting armrest of the driver's seat

NOTE
After the clamping screw (1) is loosened, the armrest is
automatically moved upward by spring pressure.
- Sit on the driver's seat and loosen the clamping screw (1).
- Push the armrest (3) down against the spring pressure
until a comfortable arm position is achieved.
- Tighten the clamping screw (1).
- Loosen the clamping screw (2) and slide the armrest (3)
forwards or backwards until the control levers (4) are
easily reached.
- Tighten the clamping screw (2).
4
3
2
1
e336-02/38
27