Mast Removal; Towing Instructions; Towing Procedure - Linde E 20-02 Operating Instructions Manual

Fork lift truck
Table of Contents

Advertisement

Mast removal, towing instructions

Mast removal

CAUTION
Attach the lifting sling to the upper cross mem-
ber (1) on the outer upright of the mast.
This work may only be performed by the qualified staff of
your authorized distributor.
52

Towing instructions

If, in exceptional cases, the lift truck needs to be towed, a tow
bar or rope can be attached to the tow pin in the tow coupling.
A rope can also be attached at the bottom of the mast.
CAUTION
When towed, the truck can only be braked
mechanically with the brake pedal or the hand-
brake.
1
336/54

Towing procedure

NOTE
The power steering is inoperative when the emergency
stop button is depressed.
-
Depress the emergency stop button.
-
Lower the load, but only so far that the forks will not contact
the ground when towing.
-
Remove the load.
-
Attach the tow bar to the tow pin or a rope at the bottom of
the mast.
-
One driver must steer the truck being towed and operate
the brake when needed.
Tow the fork truck and do not exceed the maximum operating
speed of the truck.
e336-02/17
Operation

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E 25-02E 30-02E 20/600-02E 25/600-02E 30/600-02

Table of Contents