Closing The Overhead Guard - Linde E 20-02 Operating Instructions Manual

Daily checks and servicing before operation
NOTE
For safety reasons, a shock absorber (5) is installed to
reduce the opening and closing speed.
5

Closing the overhead guard

- Stand behind the truck on the left-hand side.
- Seize the overhead guard either at the grip* or the rear
overhead guard support and tilt it back as far as the 2nd
locking position (6).
- Push the lever (7) up until the lock (6) for the 2nd lock-in
position is free.
- Tilt the overhead guard forward until it reaches the first
lock-in position.
- Push the cabin slightly forward and pull the lever (4) out
until the lock (6) is free.
- Tilt the overhead guard fully down until the lock engages.
* Option
6
4
6
e336-02/05
7
e336-02/27
Beginning operation
NOTE
The overhead guard locking lever (2) and locking pin (8)
lock in the end position.
The truck can be taken into operation only when the
overhead guard is properly engaged.
8
2
e336-02/65
23