Before Operation; Safety Rules; Safety Information; Handling Fluids And Lubricants - Linde E 20-02 Operating Instructions Manual

Fork lift truck

Hide thumbs

Table of Contents

Safety rules

The responsible persons, particularly the truck operator and

servicing personnel, must be instructed in the rules for the

normal and proper use of industrial trucks included with these

operating instructions.

The employer must ensure that the driver has understood all

of the safety information.

Please observe the guidelines and safety rules therein for

example:

information on the operation of industrial trucks

rules for roadways and work areas

rights, duties and safety rules for the operator

operation in special areas

information related to starting, driving and braking

service and repair information

recurrent inspections, accident prevention check

disposal of greases, oil and batteries

remaining risks.

The operator (employer) or the responsible person must

ensure that all the guidelines and safety rules applicable for

your truck are observed.

When instructing a trained operator, acquaint him with the

special features of the lift truck (double-pedal control,

main control lever, brake pedal)

optional attachments

special operating characteristics,

by training and practicing driving, shifting and steering oper-

ations until they are completely mastered.

Only then start to practice shelf-stacking.

ATTENTION

If the working area is not sufficiently illuminated,

working lights* must be fitted to ensure the

driver's view.

ATTENTION

Later modifications of drive or brake parameters

of the LDC control make it necessary to inform

and train again the truck driver.

In case of tip-over

Follow these

WARNING

instructions

The stability of the truck in the work area is ensured if

employed properly. Should the truck tip over during an

unauthorised application or due to incorrect operation, always

follow the instructions depicted below.

Safety information

The precautions WARNING, CAUTION, ATTENTION and

NOTE in this manual are provided to indicate special dangers

or unusual information requiring special identification:

WARNING

indicates hazards that may result in personal

injury or death and/or substantial damage to the

product.

CAUTION

indicates hazards that may result in personal

injury and/or substantial damage to the product.

ATTENTION

indicates hazards that may result in damage to

or destruction of the product.

This note is found on various positions of the

truck where special attention is required. Read

the appropriate section of your operating in-

structions.

Further warning notices are also used for your safety. Please

observe the various symbols.

NOTE

Identifies technical information requiring special atten-

tion because the connection may not even be obvious to

skilled personnel.

Stay

buckled up

Don't jump

Hold on tight

as specified by the manufacturer.

Only store fluids and lubricants in approved containers at

specified storage places. As they could be inflammable, do

not contact them with hot objects or a naked flame.

Follow the manufacturer's safety and disposal instructions

when using fluids and lubricants and cleaning compounds.

Avoid spilling fluids and lubricants. Remove any spillage

immediately with a suitable binding agent and dispose of as

specified.

Also dispose of used or contaminated fluids and lubricants as

specified.

Follow laws and regulations.

Clean the area surrounding the part in question before

lubrication, filter renewal or repairs in the hydraulic system.

Only use clean containers when replenishing fluids and

lubricants.

Discard parts in a way friendly to the environment.

aid is required if such an injury occurs.

environment at risk.

Lean away

Brace feet