Technical Note; Truck Takeover - Linde E 20-02 Operating Instructions Manual

Technical note

These operating instructions or excerpts thereof may only be
copied, translated or transmitted to third parties after prior
written approval by the manufacturer.
Linde pursues a policy of continuous progress in the design
and construction of its products. As a result, the illustrations
and technical details referring to design, fittings and
engineering of lift trucks are subject to change if progress
warrants it.
Therefore, the manufacturer will not accept any claims based
on the specifications, illustrations and descriptions contained
in this operating manual.
Please submit all enquiries concerning your fork truck and all
orders for spare parts to your authorised distributor, making
sure to state your correct shipping address.
For repairs, use only genuine Linde spare parts to ensure that
your Linde fork truck will maintain its original technical standard.
When ordering spare parts, it is important also to give the
following information:
Lift truck model: __________________________________
Manufacturer's serial no./Year built: __________________
Handing-over date: _______________________________
Also specify the manufacturer's number of the mast when
ordering parts.
Mast no.: ________________________________________
Mast lifting height: ____________________________ mm
When taking over the fork lift truck, transfer the data from the
assembly type plates into this operating manual.

Truck takeover

Every fork truck undergoes careful inspection before leaving
the factory in order to make sure that it will be in satisfactory
condition and fully equipped as ordered when delivered to
the customer. Authorised distributors are under obligation to
reinspect the truck before delivery and to hand it over in good
order. In order to avoid later complaints and inconvenience
to customers, you are requested to ascertain that the truck is
in satisfactory condition and fully equipped at the time of
delivery and to acknowledge orderly handing/taking over of
the truck in the manufacturer's certificate of conformity.
The following technical manuals are supplied with each fork
truck:
1 Operating manual
1 EC certificate of conformity
(The manufacturer certifies that the industrial truck con-
forms to EC guidelines for machines)
1 Rules for the normal and proper use of industrial trucks
(VDMA)
Wishing you satisfactory operation and much success,
Your
Linde AG
Linde Material Handling Division
Aschaffenburg
Foreword
3