Safety rules
Accident prevention check
The accident prevention regulations require that the forklift
truck must be checked at least once a year for proper working
condition by trained personnel. Please contact your author-
ised distributor in this regard.
Operation of industrial trucks in the plant
area
ATTENTION
Many plant areas are so-called limited public
traffic areas.
We advise you to check if your company liability insur-
ance covers any damages occurring with your fork truck
against third parties on "limited" public traffic areas.
Running-in instructions
The truck can be operated at full speed directly. Avoid
sustained high loads on the working hydraulic system and the
travel drive in the first 50 hours of operation.
Tighten wheel nuts daily prior to starting operation or after a
wheel change until they are seated firmly, i.e. until no further
tightening is possible.
Torque opposite
front wheel collar nuts to: ......................................... 460 Nm
rear wheel collar nuts to: .......................................... 210 Nm
NOTE
Refer to the tightening instructions on the tag attached to
the steering column.
Before operation
Checks and services prior to initial opera-
*
tion of the truck
-
Check condition, level and specific gravity of electrolyte of
the battery
-
Check tyre inflation pressure
-
Tighten wheel nuts
-
Check hydraulic oil level
-
Check steering system
-
Check braking system
-
Check mast and attachments
-
Check condition and tightness of electric cables, connec-
tors and connections
*
Daily checks
-
Check battery charge
-
Tyre inflation pressure
*
The description of the services can also be located in the
index.
19