Inspection And Maintenance Every 500 To 1000 Hours Or Annually; Clean The Steering Axle; Lubricate The Steering Axle; Inspect The Joystick Boot - Linde E 20-02 Operating Instructions Manual

Inspection and maintenance every 500 to 1000 hours or annually

Clean the steering axle

ATTENTION
Depress the emergency stop button and protect
the electrical system (digital controller) against
spray water.
- Thoroughly clean the steering axle with water or a cold
cleaner.
66

Lubricate the steering axle

NOTE
Use lubricating grease.
- Lubricate the track rods with grease at the lubricating
nipples (arrowed) on the left and right side.
- Lubricate with a grease gun until new grease emerges at
the bearings.
336/71

Inspect the joystick boot

- Check the boot for proper seating and for damage, replacing
it if necessary.

Check the control unit for function

Special know-how and tools are required for checking the
lowering stop valve and the release in the control unit.
Please contact your Linde distributor.
336/72
Maintenance