Transport, Hoisting the truck
Transporting the truck on a lorry or low-bed
trailer
-
Lower the mast.
-
Apply the parking brake.
-
Chock the truck.
-
Lash down the truck.
Hoisting the truck with a crane
WARNING
When hoisting the truck with a
crane make sure that no persons are
within the working range of the crane!
Do not step under the elevated load!
ATTENTION
Only use a lifting sling and crane with a suf-
ficient load capacity.
For the truck weight incl. battery see the manufacturer's
plate.
To hoist with a crane, attach the lifting slings at the points
provided. The points on your lift truck are not extra identified.
50
ATTENTION
Tilt the mast fully back.
-
Turn the tow pin (5) 90° and raise it.
Insert a lifting sling (3) (3000 kg load capacity minimum)
into the tow coupling.
-
Press the tow pin down against the force of the spring, turn
90° and let it engage in the lock.
-
Sling lifting slings (2) (3000 kg load capacity minimum)
around the cross member on the outer upright of the mast.
-
Hook the ends of the slings into the crane hook (1).
ATTENTION
The safety lock (4) must close after inserting the
slings into the crane hook.
When the truck is being hoisted, the slings must not rub
against the sides of the overhead guard, rear cover and
any attachments fitted.
1
2
e3363412
Hoisting the truck with the eyebolts
the truck.
used with which the chains (2, 6) lead straight up from the
eyebolts (1).
-
-
The lifting gear must not touch the overhead guard and
any attachments fitted.
4
3
3
2
5
E335/054
CAUTION
Only use a slifting sling and acrane with a suffi-
cient capacity. See the manufacturer's plae for
ATTENTION
The truck may be hoisted with the eyebolts (1)
only if the appropriate lifting equipment (3) is
Hook the chains (6) (minimum capacity 3000 kg) into the
eyebolts (1) on the counterweight.
Hook the chains (2) (minimum capacity 3000 kg) into the
eyebolts (1) on the frame.
ATTENTION
After attaching the lifting slings to the crane
hook (4), the hook safety (5) must close.
4
5
3
2
1
Operation
*
6
1
e3352303