Transporting The Load; Unloading; Before Leaving The Lift Truck Unattended; Note - Linde E 20-02 Operating Instructions Manual

Fork lift truck
Table of Contents

Advertisement

Transporting the load, unloading

Transporting the load

NOTE

In goods traffic, the shipper must load and fasten the
goods safely. Therefore pay attention to proper stacking
and undamaged packaging, pallets, etc. The hauler is
responsible for safe loading.
-
Do not transport an off-centre load (e.g. if a sideshift is
fitted).
-
Transport the load near the ground.
-
When travelling on slopes, always drive the truck with the
forks facing uphill when carrying a load. Never drive or turn
across the slope.
-
If you do not have a clear view, work with a guide.
-
If your load obstructs forward vision, you must travel with
the load trailing, except when travelling uphill.
48

Unloading

-
Carefully drive the truck up to the racking.
-
Elevate the fork carriage to the proper height.
-
Set the mast to the vertical position.
-
Drive carefully into the rack.
-
Lower the load slowly until the forks are clear.
-
Reverse the truck.
WARNING
Never park and leave the lift truck unattended
with the load elevated.
336/50

Before leaving the lift truck unattended

-
Deposit the load and lower the fork carriage.
-
Slightly tilt the mast forward. The forks must touch the
ground.
-
Engage the handbrake (2).
-
Depress the emergency stop button (3).
-
Turn the switch key (1) anti-clockwise as far as possible
and remove it.
-
Open the seat belt.
e3352301
e336-02/44
Operation
1
2
3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

E 25-02E 30-02E 20/600-02E 25/600-02E 30/600-02

Table of Contents

Save PDF