Tow Coupling; Forced Opening Of Overhead Guard Without Bowden Cable; Attention - Linde E 20-02 Operating Instructions Manual

Tow coupling

Tow coupling
NOTE
Only use the tow coupling for towing light trailers in the
plant area.
(Please observe the valid accident prevention and VDI
regulations.)
- Turn the tow pin (1) 90 degrees and pull it up.
- Insert the tow bar eye into the coupling.
- Press the tow pin down against the pressure of the spring,
turn the pin 90° and allow it to engage in the lock.
Forced opening of overhead guard without
Bowden cable
NOTE
Is only required if the overhead guard can not be opened
via the Bowden cable with lever (4).
- Lower the mast.
If a triplex mast with double auxiliary hydraulics is fitted, lift
the mast and secure against inadvertent lowering.
- Push against the lever (2) with a suitable tool (handle of
hammer (1), iron bar, etc.).
The overhead guard is unlocked and it is held only by the
latch (3).

ATTENTION

After unlatching, the overhead guard is tilted up
automatically by the spring pack.
- The overhead guard can continue to be opened as usual.
2
1
1
336/53
3
335/103
Operation
4
e336-02/60
49