Hour Meter; Battery Discharge Indicator - Linde E 20-02 Operating Instructions Manual

Composite instrument
The composite instrument also contains the following indicators
and instruments:

1 Battery discharge indicator

2 Hour meter (LCD display)
!
P
4
3
2
1
9
8

Hour meter

Indicates the operating time of the truck in hours. It operates
only when the key switch is turned on, the emergency button
pulled out and the seat switch activated.
The hour meter serves as proof of the operating time of the
truck and for scheduling inspections and maintenance services.
The flashing "h" symbol (5) and decimal point (6) show that the
hour meter is on.
The left row of figures (3) displays the full hours of operation,
the right figure (4) indicates tenths of an hour.
NOTE
When replacing a defective hour meter, the number of
effective service hours has to be noted. Affix this infor-
mation near the new hour meter on durable tape.
It is also possible to set the replacement hour meter so
that the actual aggregate service hours are displayed.
Please contact your authorised dealer in this regard.
5
6
7
335/06
Battery discharge indicator
Indicates the battery state of charge when the key switch is
turned on and the emergency button pulled out. It reduces the
working speed when the battery discharge reaches 80 %.
The battery is fully charged when the right diode (7) is
illuminated. As the battery discharges, the diodes (1) extinguish
one by one from left to right.
If only the yellow diode (8) is illuminated, the battery discharge
is up to 70 % and the battery must be recharged.
If the yellow diode (8) also extinguishes, the two red LEDs (9)
begin to flash. The battery discharge is up to about 80 % and
recharging is required.
Description
17