Introduction; Preface - Siemens SIMATIC RF600 Series System Manual

Introduction

1.1

Preface

Purpose of this document
This system manual contains the information needed to plan and configure the RF600
system.
It is intended both for programming and testing/debugging personnel who commission the
system themselves and connect it with other units (automation systems, further
programming devices), as well as for service and maintenance personnel who install
expansions or carry out fault/error analyses.
Scope of this documentation
This documentation is valid for all supplied versions of the SIMATIC RF600 system and
describes the state of delivery as of 11/2018. If you are using older firmware versions, please
refer to the 08/2011 edition of the documentation.
Registered trademarks
SIMATIC
trademarks of Siemens AG.
Recycling and disposal
The products are low in harmful substances, can be recycled and meet the requirements of
the Directive 2012/19/EU for disposal of waste electrical and electronic equipment (WEEE).
Do not dispose of the products at public disposal sites.
For environmentally compliant recycling and disposal of your electronic waste, please
contact a company certified for the disposal of electronic waste or your Siemens
representative.
Note the different country-specific regulations.
SIMATIC RF600
System Manual, 11/2018, J31069-D0171-U001-A21-7618
, SIMATIC RF , MOBY
® ®
, RF MANAGER and SIMATIC Sensors
® ®
1
are registered
®
13