Standards, specifications, approvals
Proof of suitability
MTBF
Measured at the output of the antenna socket.
1)
All supply and signal voltages must be safety extra low voltage (SELV/PELV according to
2)
EN 60950). The voltage sources must meet the requirements of limited power sources (LPS) and
NEC Class 2.
Note that, depending on the power consumption, using extension cables > 20 m (6GT2891-4FN50)
may lead to a voltage drop on the reader. This voltage drop can mean that the necessary mini-
mum voltage on the reader is below the required 20 V.
The values for shock and vibration are maximum values and must not be applied continuously.
3)
These values only apply to mounting using screws.
5.3.6
Dimension drawing
Figure 5-18
All dimensions in mm (± 0.5 mm tolerance)
SIMATIC RF600
System Manual, 11/2018, J31069-D0171-U001-A21-7618
Dimension drawing RF650R
EN 301 489-1 V1.9.2 / EN 301 489-3 V1.6.1 /
EN 302 208-1/-3 V1.4.1
FCC CFR 47, Part 15 section 15.247
31 years
Readers
5.3 SIMATIC RF650R
6GT2811-6AB20-xAA0
139