Introduction - Siemens SIMATIC Ident RF1000 Configuration Manual

Introduction

Purpose of this document
This documentation describes how you create a configuration for the SIMATIC RF1000
readers, adapt it and transfer it to the readers. This manual is aimed at users, commissioning
engineers and configuration engineers who work with the SIMATIC RF1000 readers in the
areas of configuration, engineering and commissioning and who were trained on the
software components specified in the manual. Using this manual, you can adapt the standard
configuration of the SIMATIC RF1000 readers to your needs.
Note
Trained personnel
Note that this manual is aimed exclusively at personnel trained with the software
components specified in the manual.
Registered trademarks
The following and possibly other names not identified by the registered trademark sign
registered trademarks of Siemens AG:
SIMATIC ®, SIMATIC RF ®, MOBY ®, RF-MANAGER ® and SIMATIC Sensors ®
Orientation in the documentation
You can find additional information on installing, connecting, commissioning and
programming, as well as the technical specifications of the RF1000 readers, in the operating
instructions "SIMATIC RF1000
(https://support.industry.siemens.com/cs/ww/en/ps/24223/man)".
The software components described in this manual are contained in the
"RF1000_ConfigTool.exe" file. In addition, you may need the demo application "RF1000R.exe"
("AccessControlDemo.exe"). You can find the two files on the pages of the Siemens Industry
Online Support (https://support.industry.siemens.com/cs/ww/en/ps/24223/dl).
Decommissioning
Decommission the device properly to prevent unauthorized persons from accessing
confidential data in the device memory.
To do this, restore the factory settings on the device.
You can find detailed information on this in the "SIMATIC RF1000" operating instructions.
SIMATIC RF1000
Configuration Manual, 07/2021, C79000-G8976-C647-01
1
are
®
5