Pin Assignment Of The Di/Dq Interface (X10 Di/Dq) - Siemens SIMATIC RF600 Series System Manual

Product
Wide-range power supply unit for SIMATIC RF systems
•
•
•
24 V connecting cable reader ↔ wide-range power supply unit
•
•
•
Set of protective caps
Contains 3 protective caps for antenna output, one protec-
tive cap for digital I/O interface and 2 protective caps for
Ethernet/PROFINET (required for IP65 degree of protection
when some connectors are unused)
DVD "Ident Systems Software & Documentation"
5.5.1.3

Pin assignment of the DI/DQ interface (X10 DI/DQ)

View of the DI/DQ interface (reader end)
Table 5- 38
M12 socket (reader end)
Note
Requirement for external power sources
When the DI/DQ interface is supplied with power by an external power source, this source
must meet the requirements for LPS (Limited Power Sources) and NEC Class 2.
SIMATIC RF600
System Manual, 11/2018, J31069-D0171-U001-A21-7618
With EU plug
With UK plug
With US plug
with plug, 5 m
with open ends, 2 m
with open ends, 5 m
Pin assignment of the DI/DQ interface
Pin
1
2
3
4
5
6
7
8
9
10
11
12
Article number
6GT2898-0AC00
6GT2898-0AC10
6GT2898-0AC20
6GT2891-0PH50
6GT2891-4EH20
6GT2891-4EH50
6GT2898-4AA10
6GT2080-2AA20
Pin assignment
GND (output for supply of digital inputs/outputs [not electrical-
ly isolated])
VCC (output for supply of digital inputs/outputs [not electrically
isolated])
DO Common / Output Common
DO 0 / Output 00
DO 1 / Output 01
DO 2 / Output 02
DO 3 / Output 03
DI 0 / Input 00
DI Common / Input Common
DI 1 / Input 01
DI 2 / Input 02
DI 3 / Input 03
Readers
5.5 SIMATIC RF685R
171