Siemens SIMATIC RF600 Series System Manual page 489

EMC
USA
Federal Communications
Commission
Radio Frequency Interference
Statement
Shielded Cables
Modifications
Conditions of Operations
SIMATIC RF600
System Manual, 11/2018, J31069-D0171-U001-A21-7618
This equipment has been tested and found to comply with the limits
for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is
likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Shielded cables must be used with this equipment to maintain com-
pliance with FCC regulations.
Changes or modifications not expressly approved by the manufac-
turer could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interfer-
ence received, including interference that may cause undesired op-
eration.
Appendix
A.1 Certificates and approvals
489