Certificates And Approvals; Simatic Rf625T; Characteristics - Siemens SIMATIC RF600 Series System Manual

Transponder

7.10 SIMATIC RF625T

7.9.5

Certificates and approvals

Certificate
Federal Communications
Commission
7.10 SIMATIC RF625T
7.10.1

Characteristics

The SIMATIC RF625T transponder is a passive, maintenance-free data carrier with a round
design. It operates based on UHF Class 1 Gen 2 technology and is used to save the
"Electronic Product Code" (EPC) of 96 bits/128 bits. The transponder also has a 512-bit user
memory.
The areas of application are industrial asset management, RF identification of tools,
containers and metallic equipment.
The Disk Tag is small and rugged and suitable for industrial applications with degree of
protection IP68. It is highly resistant to oil, grease and cleaning agents.
Ideally, the SIMATIC RF625T is mounted directly on a flat metal surface of at least 150 mm
diameter where it achieves a typical sensing distance of 1.5 m.
SIMATIC RF625T
Depending on the environment, the reader/the antennas and the set power
1)
392
Description
Conformity with the RED directive 2014/53/EU
Conformity with the RoHS directive 2011/65/EU
Passive labels and transponders comply with the valid regulations;
certification is not required.
Characteristics
Area of application
Frequency range
Air interface
Polarization
Memory
Read range
Mounting
Mounting
Identification tasks in rugged industrial environments
ETSI: 865 to 868 MHz
•
FCC: 902 to 928 MHz
•
According to ISO 18000-63
Linear
EPC: 96 / 128 bits
•
User memory: 64 bytes
•
Max. 1.5 m
1)
1 x M3 screw
Designed for direct mounting on conductive materials
(preferably metal).
System Manual, 11/2018, J31069-D0171-U001-A21-7618
SIMATIC RF600