Introduction - Siemens SIMATIC RF660M Operating Instructions Manual

Introduction

Purpose of these operating instructions
These operating instructions contain information required for commissioning and using the
SIMATIC RF660M (consisting of RF160B and RF660H). The documentation is aimed at
commissioning engineers, configuring engineers and operators who commission, set
up/configure and work with the mobile readers.
Basic knowledge required
These operating instructions assume general knowledge of automation engineering and
identification systems.
Scope of validity of this documentation
These operating instructions are valid for the SIMATIC RF660M as of product version "01",
firmware version V1.0 and describes the delivery state as of 02/2022.
Trademarks
The following and possibly other names not identified by the registered trademark sign ® are
registered trademarks of Siemens AG:
SIMATIC ®, SIMATIC RF ® and MOBY ®
Orientation in the documentation
You can find detailed information on the transponders that can be read with SIMATIC RF160B
in the "SIMATIC RF600" system manuals.
You will find the current version of the manual on the pages of the Siemens Industry Online
Support (https://support.industry.siemens.com/cs/ww/en/ps/14971/man).
Abbreviations and naming conventions
The following terms/abbreviations are used synonymously in this document:
Mobile reader
Transponder
Mobile reader SIMATIC RF660M
Operating Instructions, 02/2022, C79000-G8976-C660-01
Reader, hand terminal, handheld
Tag, data carrier, mobile data storage (MDS)
1
5